
Patima 3D housing for Panasonic TM700
#1
Posted 20 December 2010 - 12:01 AM
The beam splitter design allows for the closer interocular distance (or more precise the interaxial separation) which is necessary for closeups. This flex
Here are more details and pics for the housing:
http://patima.nayana.kr/xe/3007
Drew
Moderator
"Journalism is what someone else does not want printed, everything else is public relations."
"I was born not knowing, and have only had a little time to change that here and there.
#2
Posted 20 December 2010 - 09:19 AM
Patima had the housing at DEMA:

Lee from Patima with the housing.

Internals of the housing.

Lee with the bracket that allows the cameras to be mounted vertically.

A poor shot of the monitor. It shows the each eye's images side by side.
Lee was very interesting to chat to about 3D. He pointed out that in 2 years time, 3D will be integrated into every new TV-but there is a signoificant shortage of content. Patima are actually going into 3D film production to specifically address this.
Adam
Adam Hanlon-underwater photographer and videographer
Editor-wetpixel
web | Flickr | twitter | Linkedin | Facebook
#3
Posted 22 December 2010 - 04:56 PM
He pointed out that in 2 years time, 3D will be integrated into every new TV-but there is a signoificant shortage of content. Patima are actually going into 3D film production to specifically address this.
Adam
There was a shortage of HD and then RED 4K content when those hypes hit town... I wonder if the streets will be paved with gold 'THIS' time or will there just be more people buying expensive paper weights and holiday camera's ???
Dive safe
DeanB
#4
Posted 22 December 2010 - 05:18 PM
www.ginclearfilm.com
www.facebook.com/ginclearfilm
GATES DEEP EPIC Based in Sydney