Posted 06 June 2018 - 01:04 PM
Posted 06 June 2018 - 10:15 PM
this looks like a coated lens, so no polishing! Otherwise you get a "cloudy" surface....
You can only try to find the same lens with a scratched front lens, and then change the element.
Have done that with a Inon UFL-165AD with the rear element.
Posted 07 June 2018 - 12:15 AM
Sorry to see that.
Is this the UWL-H100 67MM. type 1?
Like on this picture.
Verstuurd vanaf mijn Nexus 6P met Tapatalk
Edited by Uwshoot46, 07 June 2018 - 12:16 AM.
Posted 07 June 2018 - 12:29 PM
Posted 07 June 2018 - 05:28 PM
Thanks for the input I will give that a try I was trying to find it on some photos but will try again once I'm home from my dive trip
Posted 08 June 2018 - 11:49 AM
To do what the previous poster says check that you dont see it in the fov
if you do undo the plastic LD part with an allen key and rotate one or two positions then reset
Posted 13 June 2018 - 10:02 PM
Have you actually even seen the scratch in the image? My guess is you'll never notice it. See the following for an extreme example.
Repairs can be quite pricey. I probably wouldn't bother unless it really stands out in your images, if it's noticeable at all.