I know that I'm relatively new here, but I thought I'd check if anyone is interested in a super simple LED trigger for their CANON Nauticam housing?
I set out to design a board for a simple optical trigger to fit to my NA-5DSR housing powered by two CR1632 batteries.
If there is interest, I could knock up a few more. They may make a good backup for those of you shooting with more expensive optical triggers.
Since it's very simple, it only does 1st curtain sync, and manual strobe adjustment.
It has no trouble triggering my new Z-330s (Thanks Peter Mooney!). I'll try and see if I can test it with a friends YS-D2s sometime in the next week or two. Hopefully it should be fine - I'm using 15 degree beam angle CREE LEDs, and they're incredibly bright.
With the board installed, there are two 10mm tall spacers between it and the housing with longer M3 screws for mounting. I've got some proper stainless ones on the way.
I'm not a business, I'm not commercial. I'll simply be making these on my desk in the spare room if there is interest. Hopefully this doesn't violate the Ts&Cs of the classifieds forum.
Edited by Bevanj, 09 October 2018 - 12:49 PM.