Jump to content

- - - - -

Housing with Cannon S45

  • Please log in to reply
2 replies to this topic

#1 fai71


    Brine Shrimp

  • Member
  • Pip
  • 1 posts

Posted 21 November 2002 - 10:49 AM

Hi all members

i am a new member of this forum. I am using Cannon S45 and with the diving housing to take photo when diving.

But i have some Question to ask :
1) how to prevent the flog inside the housing? ( even i use the anti-flog provided by the cannon.)

2) how to use the antiflog provided by cannon? should i use on the lens directly? should also use on the whole housing inside?

Thx your reply and help !^v^

fai from HK

#2 Arnon_Ayal


    Sperm Whale

  • Member
  • PipPipPipPipPip
  • 1826 posts
  • Gender:Male

Posted 21 November 2002 - 12:24 PM

The fog is mainly because of the heat that came out from the camera (at the battery)
What I found to work for me best are:
1. In the dive, if I the fog am starting the only thing you can do it is to shutdown the LCD screen, the screen is the most electricity eater.
2. Put Silica gel package inside the u/w case.
3. Try to close the camera (into the u/w case) at dry place.
4. If you use the antifog put a little on the glass screen in front of the lens, I found that there is a lot better products in the market there the one that Canon provide.
Arnon Ayal www.arnonayal.com
Nikon D200, Ikelite housing, Dual SB105.

#3 james


    The Engineer

  • Super Mod
  • 9969 posts
  • Location:Houston TX

Posted 21 November 2002 - 12:26 PM


Do a search here on "fog" and you should turn up some GREAT advice.

Here, I did a search for you, click here:

Search Results

Try doing a search yourself - there is lots of great info here!

The camera heats up when it is in use and causes fogging.

Taking a camera and housing out of a dry air conditioned boat and opening it outside on a hot humid diveboat will cause fogging.

Fogging is easy to avoid and does NOT require any kind of "anti fog" liquid.

Canon 1DsMkIII - Seacam Housing
Dual Ikelite Strobes
Photo site - www.reefpix.org