4 replies to this topic

[yahsemtough]

I have printed off a couple pick from Qimage and have never had this show up.

The one picture keeps printing with what seems to be a slight bit less ink of something at the last 1'2 inch or so. Only on this picture and, only with Qimage. I tried cleaning the 900 heads etc and no affect. I used a different program to print and no problem.

Anyone else ever run across this? Have any suggestions?

[bobjarman]

Nope, not me. Yahoo groups has a pretty active qimage newsgroup you might want to post your problem to.

Every time I have a problem its the printer.....or the operator


http://groups.yahoo....oup/qimage/join

[wetpixel]

I love Qimage.

Well, except for the clunkly interface. And, that you can't change the spool drive on a PC, so if you system partition is running out of space you can't raster large groups of images at the same time.

[yahsemtough]

I'll try the group out.

It has not happened before, or on this photo before. I was only printing the one picture so I assume I had not overloaded. It happened on the four prints I tried. I cleaned the heads, checked alignment, downloaded the newest version of Qimage. All very strange.

Thanks for the suggestions. Anyone else?

[rstark]

Eric, have you emailed your suggestions to Mike Chaney? As you know he does come out with a new version every other hour.