Jump to content


Photo
- - - - -

Results from the new TTL slave sensor from Ikelite...


  • Please log in to reply
24 replies to this topic

#21 Reefkeep

Reefkeep

    Eagle Ray

  • Member
  • PipPipPip
  • 340 posts
  • Location:Jax Florida

Posted 12 June 2002 - 04:42 PM

posted on 6-13-2002 at 12:41 AM



Day II with the remote sensor, I even played with the preflash option in the sensor, results not effected. Still shoots a full load..

#22 james

james

    The Engineer

  • Super Mod
  • 9969 posts
  • Location:Houston TX

Posted 12 June 2002 - 05:02 PM

Shoot it on A

Dial up the stop to the max (f9 or so)

Go to speedlite options - variable power. Set power to -1 or -1.5

Start shooting.

Also, this might help you:

www.reefpix.org/iketest/

Good luck!
James Wiseman
Canon 1DsMkIII - Seacam Housing
Dual Ikelite Strobes
Photo site - www.reefpix.org

#23 Reefkeep

Reefkeep

    Eagle Ray

  • Member
  • PipPipPip
  • 340 posts
  • Location:Jax Florida

Posted 12 June 2002 - 05:38 PM

Great..That helped!

#24 derway

derway

    Great White

  • Member
  • PipPipPipPip
  • 1136 posts
  • Location:Pasadena CA

Posted 14 June 2002 - 01:15 PM

Well, looks like the CP5000, as well as the G2, both insist that if you want to manually set the aperture and shutter, then by damn you must want a full dump, and no option to still do TTL.

Dumb damn design decision!

For the G2, it is documented in the manual.
Don Erway
http://picasaweb.google.com/onederway/
http://www.pbase.com/derway

nikon n90s/ikelite housing/twin SS-200 canon G2/ikelite/DS-50/optical TTL slave
sony V3/ikelite/DS-51/Heinrich DA2 slave

#25 Reefkeep

Reefkeep

    Eagle Ray

  • Member
  • PipPipPip
  • 340 posts
  • Location:Jax Florida

Posted 14 June 2002 - 04:10 PM

I can't say it's the camera, I don't have the problem when I use the cord. (only with the remote sensor)