All,
This week I will try to make some pictures with an Canon 7D with EF-S60mm lens.
I will make these in Holland (green not to clear water).
What settings would you suggest for the camera. (I will use one Inon 240 flash).
Regards,
Martijn
60MM Macro settings canon 7D
Started by Martijn, Jul 18 2011 11:43 PM
3 replies to this topic
#2
onewolf
-
- Member
- 91 posts
Moray Eel
- Gender:Male
- Location:East Central Florida
- Interests:Boating, Diving, Fishing, Photography, Kayaking
-
Posted 19 July 2011 - 08:50 AM
Is your strobe configured for optical slave flash or hardwired flash?
My starting point with my Canon T2i and EF-S 60mm with dual S&S 110A strobes (slave fired) is 1/160, f14-f22. Center point focus. ISO200.
My starting point with my Canon T2i and EF-S 60mm with dual S&S 110A strobes (slave fired) is 1/160, f14-f22. Center point focus. ISO200.
Nauticam 550D, Canon T2i, Canon 60mm macro, Canon 100mm IS, Tokina 10-17FE, Zen 100mm domeport, Nauticam 180deg viewfinder, Dual S&S YS-110a
--- Visit My Website ---
#3
bvanant
-
- Team Wetpixel
-
- 1349 posts
Orca
- Gender:Male
- Location:Los Angeles (more or less)
- Interests:Science, photography, travel
-
Posted 19 July 2011 - 12:41 PM
About the same for the green/blue here in Los Angeles but I think ISO 160 is a little less noisy (for me) and I typically start at 1/200 and F11 or so depending on how much DOF you want.Is your strobe configured for optical slave flash or hardwired flash?
My starting point with my Canon T2i and EF-S 60mm with dual S&S 110A strobes (slave fired) is 1/160, f14-f22. Center point focus. ISO200.
Bill
Bill
Canon 7d, 50D, Nauticam,Subal, Inon Ringflash, Athena Ringflash, Inon z240 etc.
www.blueviews.net
Canon 7d, 50D, Nauticam,Subal, Inon Ringflash, Athena Ringflash, Inon z240 etc.
www.blueviews.net
#4
Martijn
-
- Member
- 13 posts
Sea Nettle
Posted 19 July 2011 - 10:05 PM
About the same for the green/blue here in Los Angeles but I think ISO 160 is a little less noisy (for me) and I typically start at 1/200 and F11 or so depending on how much DOF you want.
Bill
Thank you for your responses.
I use btw twon INON Z240 with a TTL converter.
Regards,
Martijn
