Jump to content


Photo
- - - - -

Urgent help needed


  • Please log in to reply
2 replies to this topic

#1 Shadis

Shadis

    Sea Nettle

  • Member
  • Pip
  • 10 posts
  • Gender:Male
  • Location:Eilat , Israel

Posted 20 February 2012 - 01:11 AM

Hi

I need your urgent help
I have a sea and sea housing for canon 5d II . The problem is with the quick control dial . I can see that the 2 wheels inside the housing are rotating fine , I know that the dial on the camera works but when I put the camera inside the housing and rotate the dial nothing happens .

What can I do ?

Shadi

#2 errbrr

errbrr

    Sting Ray

  • Member
  • PipPipPip
  • 221 posts
  • Gender:Female
  • Location:Melbourne, Australia

Posted 20 February 2012 - 04:12 PM

I had this problem on an early dive. If you're talking about the dial around the set button, there are two "on" positions for the camera. The first one deactivates this wheel, you need to switch the camera to the second "on" position.

#3 Shadis

Shadis

    Sea Nettle

  • Member
  • Pip
  • 10 posts
  • Gender:Male
  • Location:Eilat , Israel

Posted 20 February 2012 - 06:30 PM

I had this problem on an early dive. If you're talking about the dial around the set button, there are two "on" positions for the camera. The first one deactivates this wheel, you need to switch the camera to the second "on" position.



II know that and that is not the problem