Hey all,
I've just switched from DS-161 to Z240; and I had no luck with the manual (M) setting of Z240. I tried several attempts playing around with the dial from the lowest to the highest point; but no changes of the light strength at all.
Here's my gear list:
- Canon 5D Mark II
- Aquatica house
- Z240
- Sea&Sea sync cords
Anything wrong with my setting or strobes?
Thanks for any help.
AJ
Please help - manual setting Inon Z240
Started by SOX404, May 06 2012 08:08 PM
2 replies to this topic
#1
SOX404
-
- Member
- 23 posts
Clownfish
Posted 06 May 2012 - 08:08 PM
AJ
Canon 5D Mark II | 8-15mm Fisheye | 17-40mm f/4L | 100mm f/2.8L Macro
Aquatica Housing | 2 Ikelite DS-161 | Sola 600 focus light | bells & whistles
Canon 5D Mark II | 8-15mm Fisheye | 17-40mm f/4L | 100mm f/2.8L Macro
Aquatica Housing | 2 Ikelite DS-161 | Sola 600 focus light | bells & whistles
#2
Gudge
-
- Team Wetpixel
-
- 512 posts
Tiger Shark
- Gender:Male
- Location:Pottsville, NSW Australia
-
Posted 06 May 2012 - 09:21 PM
Most probably you have the ACC switch set incorrectly, with electric sync cords it should be locked in the depressed position. Read this:
http://www.reefphoto.com/kb.php?id=7
http://www.reefphoto.com/kb.php?id=7
Canon 7D, Nauticam NA-7D housing, 2 x Inon Z240, 1 x Inon S2000, Tokina 10-17 & 12-24, Sigma 17-70 Macro, Tokina 35 macro, Canon 60 & 100 macro, Tamron 2X & Kenko 1.X Teleconverters.
#3
SOX404
-
- Member
- 23 posts
Clownfish
Posted 07 May 2012 - 05:29 AM
You're right. Problem solved! Thanks.
AJ
Canon 5D Mark II | 8-15mm Fisheye | 17-40mm f/4L | 100mm f/2.8L Macro
Aquatica Housing | 2 Ikelite DS-161 | Sola 600 focus light | bells & whistles
Canon 5D Mark II | 8-15mm Fisheye | 17-40mm f/4L | 100mm f/2.8L Macro
Aquatica Housing | 2 Ikelite DS-161 | Sola 600 focus light | bells & whistles
