Which is king on Nikon DX 16mm fisheye / 16-35mm / 8-16mm Sigma
Posted 10 November 2012 - 12:28 PM
So with all lenses set at 16mm which would perform the best at say f/8 with correctly positioned and set strobes etc
Posted 11 November 2012 - 03:59 PM
What are you wanting to photograph? How important is sharpness in the corners? Why not a Sigma 15mm, which may be better than the lenses that you mention?
Posted 11 November 2012 - 04:48 PM
Optical Ocean Sales.com
Nauticam, Subal, Sea & Sea, Olympus, Seacam, Gates, Ikelite, Zen, Fix, 10Bar, Kraken, Light & Motion, iTorch/I-DAS & Fantasea Line
Cameras, Housings, Strobes, Arms, Trays & Accessories. System Packages. Photo Expeditions.
Blog & Gallery: Optical Ocean Sales Blog - Flickr Galleries: Optical Ocean on Flickr
Posted 11 November 2012 - 05:09 PM
I currently use an 18-70mm with +4 which does a pretty good job, far better than my 10-17mm at the 17mm end but I still think it could be a touch better.
Subject being babies, of the human variety in the pool. I'll post a couple of examples tomorrow.
Posted 11 November 2012 - 09:00 PM
Tokina 10-17mm @ 17mm
Nikon 18-70mm @18mm
To me the 18-70mm wins in this scenario, but I still think we can do better.
Posted 13 November 2012 - 03:37 AM
Please excuse the subject matter and the slight difference in camera to subject position... for the purposes of this little side by side test I think the 2-3" distance variation is of little importance. To be honest I was expecting the Nikon prime to be a little shaper but not by this much! I shot a few frames with each lens to be sure that the results were consistent and they are.
Anyway, with the help of Peppa Pig and my favourite mug here we are:
Tokina 10-17mm original shot SOOC just resized for the web.
Nikon 16mm original shot SOOC just resized for the web.
And what actually shows the detail some 100% crops:
Tokina 100% crop
Nikon 100% crop
Now these are static camera and subject shots with flash so no motion involved to account for any blur.
Not at all scientific but it's definitely made up my mind for this week's shoot.
Remember these are straight out of camera with no sharpening or anything. I should probably have used a different subject I know... a sponged print mug doesn't have very defined edges to the printing but hey, I think it shows the difference ok, especially all the little bubbles on the surfaces.
Now can I be bothered to do the same with the Nikon 18-70mm which involves striping down the port? ...Maybe later.
Edited by Baumann, 13 November 2012 - 03:42 AM.