I just got this duo and need to get the settings dialed in, so I could use some help from someone who has been down this road.
Test exposures with the camera in Manual, camera strobe forced On, and the strobe in Manual seem to work fine. This is how I used my old rig. (DX-2G + YS-01)
The TTL setting on the YS-D1 does not seem to work, but according to the manufacturer's compatibility list, it should work with the S100. So, I have something set wrong. But what?
*Any* tips on settings for these gadgets would be greatly appreciated. This fancy new strobe does TTL, I want to try it out!
Please advise on S100 + YS-D1 settings
Started by horseflesh, Nov 28 2012 04:08 PM
3 replies to this topic
#2
kmo_underwater
-
- Member
- 35 posts
Triggerfish
Posted 28 November 2012 - 04:23 PM
The s100 will only do ttl in Av or Tv modes.
#3
horseflesh
-
- Member
- 40 posts
Triggerfish
Posted 13 December 2012 - 12:47 PM
Finally got it sussed out--you are right of course, TTL does not work in Manual. Thanks to a CHDK script though, now it does!
#4
Interceptor121
-
- Member
- 290 posts
Sting Ray
- Gender:Male
- Location:Weybridge, UK
-
Posted 13 December 2012 - 02:22 PM
Finally got it sussed out--you are right of course, TTL does not work in Manual. Thanks to a CHDK script though, now it does!
Yep that's my script remember to either set to autostart and switch on the camera in manual or start the script with alt+shutter
Have fun
