padded wet bags for carrying housings in dive skiffs
#1
Posted 01 January 2013 - 09:38 AM
I typically put the whole rig into the bag on the dive boat or shore, then ride out in the skiff or other dive boat, with the housing in the bag. It goes from the bag into the water, and then as soon as I hand the camera to somebody on the skiff it goes back into the bag. I have used these bags for so long that I don't even know what other people do.
Well, the zippers have finally given out so I need some new ones. I can't seem to find any current substitute.
I think that the bags were originally intended to be soft-sided coolers for taking to football games etc, but they were private labeled by Underwater Photo-Tech. UPT was apparently absorbed into Backscatter, but I don't see anything like this on the Backscatter web site.
I also can't find any other solution for carrying housings in the boat. There seem to be no end of specialized bags for carrying dive gear and/or cameras WHEN DRY, but I don't see any solution out there for this specific need - carrynig the wet housing to/from the actual dive.
I have looked at other soft-sided cooler bags, but so far everything I have found has drawbacks. Many of them are too rectangular - they are designed for six-packs of beer. They are not padded as well either. The larger ones tend to have wheels and so forth which won't really work.
Does anybody know where to get these? Or, if not, then what do you use to carry your housing to and from the actual dive site?
#2
Posted 01 January 2013 - 10:07 AM
Canon 7D, Nauticam NA-7D, 2x Inon z240, Tokina 10-17, Canon 60mm
Flickr: http://www.flickr.co...tos/andydeitsch
#3
Posted 01 January 2013 - 11:49 AM
interesting suggestion Andy.I use one of these soft-sided coolers. It works very well.
http://www.bluewater...axonomy:316.317
#4
Posted 01 January 2013 - 01:29 PM
Cheers,
The Fin Foundation
My Images on Flikr
Canon7D & 40D, 60mm, 100mm, 17-40L, Tokina 10-17, Nauticam 7D, Sea & Sea MDX-40D YS-250's ULCS arms, Lightroom
#5
Posted 01 January 2013 - 01:35 PM
Here is the direct link where you can see some different options. I have two of the boat coolers. One to hold the full rig with strobes and a smaller version for snorkeling. Recommend the ones with the dry zippered pocket on the side. Great for keeping a towel handy and other small bits. They work great as coolers too.
This is great - just what I was looking for. What size cooler holds the full rigs? The 24 pack or larger?
#6
Posted 01 January 2013 - 02:08 PM
Canon 7D, Nauticam NA-7D, 2x Inon z240, Tokina 10-17, Canon 60mm
Flickr: http://www.flickr.co...tos/andydeitsch
#8
Posted 01 January 2013 - 04:54 PM
http://www.flickr.co...s/22898788@N04/
#9
Posted 01 January 2013 - 05:23 PM
If needed i can fill the cooler with water and it keeps the rig at water temperature.
I belive that the hard cooler protect my rig better than a soft one and the last soft cooler
became real stinky after some use as the foam inside don't dry well.
Chris
Nikon D800 - Sigma 15mm - Nikon 105mm Micro VR - Hugyfot Housing - 3 Inon Z-240 strobes - 2x2 8'' ULCS arms
Canon G12 with Patima aluminium housing - Fuji E900 with Ikelite housing
Visit My Costa Rica Website - Visit My Italy Website
#10
Posted 01 January 2013 - 07:09 PM
...available at amazon as well
Edited by bfdc, 01 January 2013 - 07:10 PM.
#11
Posted 01 January 2013 - 10:44 PM
Cheers,
Diggy
FOR WHAT IS MINE WILL KNOW MY FACE
Diggy
Canon7D, Nauticam housing, mini and large dome, canon 100mm, canon 60mm, 10-17 tokina, macro ports, extensions, two inon Z240
#12
Posted 03 January 2013 - 02:47 PM
#13
Posted 05 January 2013 - 07:43 AM
I use the 48 pack polar bear. Thing is built like a tank. Completely waterproof, so I can fill it up and have my own personal rinse tank on the boat, no other cameras allowed!! So far, no boat has objected to this. On the way home, the sloshing of the water cleans everything out, saving me a half hour of work!
You leave your rig in the bag full of water, sloshing about on the way back? Your brave
http://www.flickr.co...s/22898788@N04/
#14
Posted 11 January 2013 - 07:33 AM
I thought of using a soft-sided cooler like those mentioned here but felt the weight would be too much. Isn't a cooler filled with water and a housing heavy, awkward, cumbersome, etc.? How much water are you putting in the bag?
#15
Posted 11 January 2013 - 10:24 AM
· INON Z-240s & Sea & Sea YS-250 Pros
· SmallHD DP4 monitor & NA-DP4. Fisheye Aquavolt 3500s & 7000s
· Zen DP-100, DP-200 & DP-230
#16
Posted 15 January 2013 - 10:51 AM
Here is the direct link where you can see some different options. I have two of the boat coolers. One to hold the full rig with strobes and a smaller version for snorkeling. Recommend the ones with the dry zippered pocket on the side. Great for keeping a towel handy and other small bits. They work great as coolers too.
Cheers,
Another strong vote for an aocoolers bag. I have a bright red 48can (?) with my name embroidered on the side.
As mentioned, it can either pack in a checked-bag with wetsuits and well padded dome port inside, or it can be used as a "suitcase" by itself.
Useful as a way to carry photo gear onto a day dive boat - once there, filled half-way as a personal rinse-tank (most morons on these boats can't seem to remember NOT to put their anti-fog laden masks into the on board rinse-tank!) - and YES it is very heavy with water inside.
It also makes for a perfect place to instruct dive-boat "helpers" to "Please return my camera to THIS bag, NOT the boat rinse tank."
#17
Posted 16 January 2013 - 03:59 AM
Question, how do you guys get water on it while on the boat? Im diving off these little boats in the Philippines and I can't imagine filling it up with water and carrying it on.
