Jump to content


Photo
- - - - -

Inon Z-240 without sync port cover


  • Please log in to reply
5 replies to this topic

#1 aandk

aandk

    Hermit Crab

  • Member
  • Pip
  • 3 posts

Posted 18 January 2013 - 10:25 PM

Does anyone know if its ok to dive without the sync port cover on, and no sync cable plugged in? Ive just purchased a z-240 type II from a shop who forgot to post it. They said that the sync port is sealed and ok to dive open. He said he was an inon service technician but im not sure if this sounds right.

Thanks

#2 errbrr

errbrr

    Sting Ray

  • Member
  • PipPipPip
  • 219 posts
  • Gender:Female
  • Location:Melbourne, Australia

Posted 19 January 2013 - 02:31 AM

If you mean the optical port, it's fine. There's no o-ring in the cap anyway, it's just there to block the light. I use them with the optical sensor exposed to trigger the strobe from a wired on camera strobe sometimes.

If you mean the electrical port, it's NOT FINE. Water and metal pins don't mix. The electrical port cap should have a yellow o-ring in it, and this should be cared for like other o-rings.

#3 aandk

aandk

    Hermit Crab

  • Member
  • Pip
  • 3 posts

Posted 19 January 2013 - 03:14 AM

Yes I mean the electrical sync port on the back of the strobe. Not the optical one. Will it be OK for two days of diving on a holiday while I wait for the cover to arrive? Is it sealed like the in on service tech said?

#4 ChrigelKarrer

ChrigelKarrer

    Tiger Shark

  • Member
  • PipPipPipPip
  • 632 posts
  • Gender:Male
  • Location:Playa Herradura-Costa Rica and Sardinia-Italy

Posted 19 January 2013 - 04:42 AM

No, it's NOT fine at all as the (salt) water surrounding the pins will lead to corrosion of them and generate malfunction of the strobe.
Chris

Nikon D800 - Sigma 15mm - Nikon 105mm Micro VR - Hugyfot Housing - 3 Inon Z-240 strobes - 2x2 8'' ULCS arms

Canon G12 with Patima aluminium housing - Fuji E900 with Ikelite housing
Visit My Costa Rica Website - Visit My Italy Website


#5 marcw

marcw

    Wolf Eel

  • Member
  • PipPip
  • 136 posts
  • Gender:Male

Posted 19 January 2013 - 11:34 AM

i do not know where you are but you might find a replacement if you are lucky. the threads are common size for the port. maybe find a replacement.

why did you take it off?

#6 okuma

okuma

    Great Hammerhead

  • Industry
  • PipPipPipPip
  • 734 posts
  • Gender:Male
  • Location:Anaheim, CA USA

Posted 19 January 2013 - 07:15 PM

When you get a cap, make sure the 'O' ring is in good, lubricated condition.

The electrical port can flood the strobe!
Underwater Photography:
If it is so easy every one would be doing it!

Nikon D 7000, Subal Housing, Inon Z 240 strobes.