Jump to content

- - - - -

Sea&Sea ttl converter on Nauticam

  • Please log in to reply
2 replies to this topic

#1 escape


    Eagle Ray

  • Member
  • PipPipPip
  • 392 posts
  • Gender:Male
  • Location:Republic of Korea

Posted 23 March 2013 - 05:08 PM

Anybody using this combo? What do I need? (bulkhead & hotshoe).

Personally I hate electric wire but friend of mine can't live without it.

He want to use ttl converter w/ 5dmk3 housing.

#2 Larry C

Larry C

    Sting Ray

  • Member
  • PipPipPip
  • 218 posts
  • Gender:Male
  • Location:Northern California
  • Interests:Diving, Sports, Antique Motorcycles and Old Trucks

Posted 24 March 2013 - 12:16 PM

This should be what you need, but double check with Ryan at Reef to make sure.


D500 NA-D500, D300 MDX-D300, 2X YS-D1, Tokina 10-17, Nikon 60AF D, Nikon 105mm AF-D, Nikon 35mm f2.0, L & M Sola 800/1200

Nikon F100 w/Sea & Sea NX100 Pro


#3 famorim


    Wolf Eel

  • Member
  • PipPip
  • 134 posts
  • Gender:Male
  • Location:Brazil
  • Interests:photo and dive

Posted 24 March 2013 - 05:28 PM

I started to use that on Aquatica housing last week.. Based on my land tests and also in the swimming pool  It worked very well with my canon wired to couple YS-120 strobes... The only issue I found was for small apertures over f/22 where it usually shows under exposures, so I needed to compensate using the TTL compensation dial on this converter.


I think it should works on Nautican too if you have the nikonos with 5 pin wired to the bulk head.


good luck.

Fabio Amorim - PBASE Gallery
Canon 5D Mark 3 | Aquatica housing | S&S YS120 Strobes | Ultralight Arms