I just got a Olympus OM-D E-M5 with a Nauticam housing, Panasonic 8mm fisheye, Olympus 60mm macro lens. Firmware body 1.6.
My buttons/settings are configured same as:
I've only dived with this setup about 10 times and 2 times my camera stopped working underwater. I shoot in Manual Mode. When the camera stops working, it doesn't respond to any button pushes except the LV button (changes from EVF to Monitor). Main dial and Sub-dial still changes Aperture and Shutter. Shutter release does nothing and I can't even turn off the camera. Camera EVF/Monitor stays on until camera runs out of battery; it doesn't fall asleep. Camera displays live image. The flash (lightning bolt) and focus confirmation (green dot) icons in the EVF/Monitor are stuck on. When I remove the battery and put it back in the camera works again. Anyone else have this problem?
No floods or leaks and my depth was around 30m deep. I notice this happening usually when I focus then try to take a picture. This problem has happened using both the Panasonic 8mm fisheye and Olympus 60mm macro lenses.
Anyone else have this problem or know of a solution?
Edited by xcetra, 15 June 2013 - 03:02 AM.