Hmmmm, got my new Ikelite 6130.1 today. The handle appears to be extremely well connected to the tray. Anyone out there with this housing using non-Ike strobe arms?
Mike
Using other strobe arms with Oly C4040 housing
Started by MikeO, Feb 08 2002 02:07 PM
3 replies to this topic
#1
Posted 08 February 2002 - 02:07 PM
Mike Oelrich
Canon EOS 40D in Seatool housing, 100mm macro, Tokina 12-24 f4, INON Z-240s.
Canon EOS 40D in Seatool housing, 100mm macro, Tokina 12-24 f4, INON Z-240s.
#2
Posted 10 February 2002 - 04:52 PM
OK, found the answer while sorting through ULCS's website. ULCS has a new part (BA-IK) that clips into the new Ike quick disconnects.
MikeO
MikeO
Mike Oelrich
Canon EOS 40D in Seatool housing, 100mm macro, Tokina 12-24 f4, INON Z-240s.
Canon EOS 40D in Seatool housing, 100mm macro, Tokina 12-24 f4, INON Z-240s.
#3
Posted 10 February 2002 - 09:26 PM
Yeah, you can get the small balls from Ikelite as well.
Or, you can get a large ball to small ball clamp, from ikelite.
Don
Or, you can get a large ball to small ball clamp, from ikelite.
Don
Don Erway
http://picasaweb.google.com/onederway/
http://www.pbase.com/derway
nikon n90s/ikelite housing/twin SS-200 canon G2/ikelite/DS-50/optical TTL slave
sony V3/ikelite/DS-51/Heinrich DA2 slave
http://picasaweb.google.com/onederway/
http://www.pbase.com/derway
nikon n90s/ikelite housing/twin SS-200 canon G2/ikelite/DS-50/optical TTL slave
sony V3/ikelite/DS-51/Heinrich DA2 slave
#4
Posted 11 February 2002 - 04:37 AM
Hmmm, wasn't aware that Ike made any 1" balls -- I'll have to look into that. I know they make the 1" to 1.25" clamp. However, I like to use a triple clamp right next to the housing to hold the slave sensor on my DS-125. If the sensor is farther up the arm, I have to keep playing with it to make sure it is aimed properly!
Mike
Mike
Mike Oelrich
Canon EOS 40D in Seatool housing, 100mm macro, Tokina 12-24 f4, INON Z-240s.
Canon EOS 40D in Seatool housing, 100mm macro, Tokina 12-24 f4, INON Z-240s.
