Jump to content


tripntx

Member Since 01 Jul 2007
Offline Last Active Jul 11 2012 05:11 PM
-----

Topics I've Started

Why different image in windows viewer vs elements 5?

23 October 2010 - 01:43 PM

Why does the images saved from Camera in windows and viewed onscreen look different when opened in Adobe Photoschop Elements 5.0?
When I open them with Elements 5, they actually look light and better, like they have been processed some. Why? It makes it hard to edit them when they aren't the same.
Can someone please shed some light on what is set wrong in Elements to cause this difference?

Used my E-PL1 uw yesterday, love the camera and PT-ep01 housing, love the housing. Using ULCS arms, tray, and INON D-2000 strobe. Had strobe 12 plus inches above camera, very slight angle up, set to EA Auto. I shot mostly f7.1 and f8, iso 100, shutter 100 to 160. Dove in Mammoth Lake Clute TX on the C-130 aircraft just snapping pictures of perch. Here's the deal, I knew they where going to be dark cause I barely touched fish with light due to all the particulates in water, and i didn't want tons of backscatter. Used kit lens set at 14mm wide position. Really believe this wide would be better if I used two strobes to light up the area. Saved MF JPEG and RAW. Only looking at JPEG cause I don't have a way to view these RAW in my copy of Elements.

FS Ikelite 6140.72 and Canon WP-DC16 housings for Canon A720IS

10 October 2010 - 07:32 AM

Have listed the following on EBay, both auctions will end on Oct 17th.

Canon WP-DC16 Housing for A720IS camera ebay auction
Posted Image


Ikelite 6140.72 Housing for Canon A710IS & A720IS digital cameras ebay auction
Posted Image


Both housings have a fiber optic block on them, and both are in excellent condition, never flooded, o'rings stored in ziplock bags when not in use.

Posted Image

Posted Image

M4/3 platform and wet lens question

26 September 2010 - 12:59 PM

Any reason to keep an INON UWL-100 Type 2 wet lens for use with current or future M4/3 camera platform?

I plan on buying an E-PL1 in the very near future. Have all my Oly C-8080 stuff on ebay, once sold I'll order the E-PL1. Then I'll sell off my Cannon A-720IS stuff to fund the PT-EP01 housing. Keeping all tray, strobe, arms, etc.

Which brings me to the INON wet lens. I've had it a year or two, it's in excellent condition, lens isn't scratched nor does it have water spots. Should I keep it or sell it? Money could be used towards funding a second strobe which I could use.

Olympus C-8080, PT-023, PPO-05, wide angle lens, and Tele lens

24 September 2010 - 06:50 PM

C-8080 Camera and PT-023 Housing ebay listing camera and housing

PPO-05 wide angle housing port and WCON-08D ebay listing for wide angle housing port and wide angle lens

TCON-14D Tele Lens ebay listing for Tele lens

Oly C-8080 and PT-023 housing repair

08 September 2010 - 06:28 PM

Trying to breath some life back into my OLY. Been using a Cannon A720IS since '08 because of the trouble I was having with broken tabs on OLY PT-023 housing.

Haven't used my Oly C-8080 since summer of '07 because I didn't feel the PT-023 housing was secure. Plastic tabs holding port to housing had broken off, and I had used an adhesive that was sort of working to hold the pieces together, but just didn't trust it enough after making 20 dives to continue taking it under water. Well, just had holes drilled and taped, used 6-32 x 1/4 set screws, and some weld-on #16 cement. The weld-on is used to make acrylic aquariums, it actually dissolves and chemically adhears with the polycarbonate housing. Gonna let it set for 24 hrs, and hopefully take the empty housing UW this weekend to see if it will hold up.

Really want an Oly E-PL1, but must be content with what I have for now.

Posted Image


Posted Image