Jump to content


mo2vation

Member Since 23 Jan 2004
Offline Last Active Sep 02 2013 07:16 AM
-----

Topics I've Started

ULCS Stuff, Ikelite Sync Cable (new!), Light & Motion Titan Parts (huge price d...

13 February 2013 - 01:05 PM

ULCS 1" Ball Mount (bolt secure) - $12 ea. I have two of these available. Both in near mint-condition. Another great item for a project, or to add a ball mount just about anyplace. I got these to top my Gorillapods.
Posted Image


Ikelite Sync Cords (Cable)

This one has never been in the water. This sync cord has the Nikonos connection on one end, and an Ikelite connection on the other end. This are not the beater you bought last time. The connections are perfect, clean and un-damaged. $80 landed to any non-FPO address in the US.








Posted Image
Light & Motion stuff (dramatic price reductions)

_________________________________


Flat Port- $125 $85
Posted Image



Titan Shutter - $225 $150. If you have a Titan housing, its not a matter of if, but of WHEN your shutter will fail. L&M told me to expect about 10,000 actuations. This one was my first replacement for the back up housing I retired - it has a few hundred activations. It is in excellent condition. O-ring perfect, contacts perfect, teeny scratches on the outside. Don't be on location without one of these - when they fail you can't shoot.
Posted Image



Main board for Titan - $150 $100. This is the main board. It has never been flooded, the LCD is perfect, contacts are clean - perfect functionality.
Posted Image
Posted Image


I also have a full complement of buttons, actuators, handles, the tray and more. Basically everything. If you're looking for L&M Parts for this housing, I'm your guy.

Thanks!


-Ken




Ultra Light Control Systems (ULCS) parts

10 December 2012 - 01:09 PM

Hi everyone

Consolidating all the ULCS stuff here into this one thread. Please PM if I can answer any questions. I'm not receiving notifications when I get a new PM here - I check often, but sometimes a day or two may go by. I promise will return your message as soon as I can.

All prices below include Shipping to any non FPO address in the US. I can ship internationally via USPS - buyer pays shipping.

__________________________________


NEW ULCS 12" Arm - $30. This is a new, never wet ULCS arm. Its just an extra I'm not using, so its time to thin the herd.
Posted Image


ULCS ADSS - $12 This was used on a Focus Light I had. I no longer have that, no longer use this. If you have a project, or a use for this it can be yours!
Posted Image


ULCS 1" Ball Mount (bolt secure) - $12 ea. I have two of these available. Both in near mint-condition. Another great item for a project, or to add a ball mount just about anyplace. I got these to top my Gorillapods.
Posted Image


Triple Clamp AC-TC - $22ea (2 available) I also have two near mint Triple clamps. Price dropped to $22, delivered!
Posted Image

Light & Motion Titan Housing hard to find parts

10 December 2012 - 12:30 PM

Hi everyone

Consolidating all the L&M stuff here into this one thread. Please PM if I can answer any questions. I'm not receiving notifications when I get a new PM here - I check often, but sometimes a day or two may go by. I promise will return your message as soon as I can.

All prices below include Shipping to any non FPO address in the US. I can ship internationally via USPS - buyer pays shipping.



__________________________________


Flat Port- $125
Posted Image



Titan Shutter - $225. If you have a Titan housing, its not a matter of if, but of WHEN your shutter will fail. L&M told me to expect about 10,000 actuations. This one was my first replacement for the back up housing I retired - it has a few hundred activations. It is in excellent condition. O-ring perfect, contacts perfect, teeny scratches on the outside. Don't be on location without one of these - when they fail you can't shoot.
Posted Image



Main board for Titan - $150. This is the main board. It has never been flooded, the LCD is perfect, contacts are clean - perfect functionality.
Posted Image
Posted Image


I also have a full complement of buttons, actuators, handles, the tray and more. Basically everything. If you're looking for L&M Parts for this housing, I'm your guy.

Thanks!


-Ken

Strobe Arms, Clamps - ULCS, TLC. ** FREE SHIPPING **

14 November 2012 - 05:21 PM

HI

More stuff hitting the bricks

I have a pair of ULCS triple clamps, three of the TLC single clamps, and a couple of TLC 12" arm
  • ULCS Triple Clamps - near new. These are super clean, a couple of dives as part of my Remote strobe rigs. Offering them for $30 each, delivered to any non-FPO address in the
  • TLC Clamps - Loved, but very clean. Three available. $25 each, delivered to any non-FPO address in the US

  • TLC 12" Arms - good condition, very rugged, very tough. Offering for $35 each, delivered to any non-FPO address in the US



Posted Image

PayPal OK!

Please contact me at ken@divematrix.com with questions.

Thanks

-Ken

FS: Ikelite Strobes, TriggerFish Remote Triggers, Sync Cords, Gorilla Pods, More!

08 November 2012 - 09:39 PM

I put together 4 Remotely Triggered Underwater Strobe outfits. I've been using one quite often, two less often. I've used three a few times, and I think I've used all four maybe three or 4 times. Probably less.

Just today I tested the cables, strobes and triggers I'm offering for sale here - all working perfectly. The prices below are what I'm asking for each of the individual components.

Of course, I can build out a complete remotely triggered strobe unit (with clamp, arms and other cables I have in inventory for the Gorilla pods, etc.) and give you the bundled good-guy discount of the decade.
Posted Image


All prices include shipping to any non-FPO address in the US.

Please send any questions to me.

Thanks!

Ken

~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Two Ikelite DS-125 Strobes.

These two strobes are my number 5 and 6 - they saw very, very little use and are in excellent condition. Serial numbers are 3634 and 6973. Both with NiMH batts. Never flooded, never dropped - both work perfectly. I have the diffusers for them and the Manual, as well (not pictured, but will be shipped with the strobes.) I have two chargers. One is a little flakey at the tip - just needs to be wiggled a bit and it works fine. The other is perfect. Offering the pair for $775, delivered

Posted Image

Posted Image

Posted Image

Posted Image








Ikelite Sync Cords (Cables)

I have several sync cords available. These are my three best - one has never been in the water, and the other two have been used a time or two and are in near-mint condition. These sync cords have the Nikonos connection on one end, and an Ikelite connection on the other end. These are not the beaters you bought last time. The connections are perfect, clean and un-damaged. $80 for the New Cord, $60 ea. for the gently used ones.

New cord
Posted Image


Gently Used Sync Cords
Posted Image




TriggerFish Remote Triggers

These things are brilliant. Machined from aluminum, filled and virtually bulletproof. Initial Tfish review on WetPixel is here: Linky. I have two of these available. I think I paid about $190 each for them, delivered to SoCal. The two I'm selling here are units #3 and #4 - very, very little use. I have two available. I'm offering them here for $140 each.

Posted Image





Gorilla Pods

After some research, I decided the Gorilla Pod "Focus" was the answer got these remotely triggered strobes. Aluminum, Negatively Buoyant, tough, flexible, strong and stealthy... it would make the perfect platform. I added a ULCS ball mount so I'd have some flexibility in mounting options and articulation. Wrap the base of the ball mount in electrical tape before you wrench it down tight! This thing is solid and ready to work with. I have two available. I'm offering these Gorilla Pods with the UCLS ball mount for $75 each.

Posted Image

Posted Image