Jump to content


zaritas

Member Since 23 Oct 2008
Offline Last Active Jun 18 2014 06:26 AM
-----

Posts I've Made

In Topic: Anthis/Nexus M-Size's ?

21 November 2008 - 10:37 AM

Hej Peter,
To be sure, Sam modification is by far the most cost efficient D200 to D300 conversion. Alternatively, you could ask a Nexus dealer about a D200 to D300 conversion. I think it involves a new back and runs about $1,000 USD. OBTW, the "," denotes a thousand delimiter in the U.S.
Welcome to the black hole of underwater photography.
Regards,
Bob


Hi Bob

Thanks for the Welcome :) to the black hole...

I'm really glad about all the helpful advise from all of you members in here :P

There is not many diving fotografers in my part of the world and there is a wealt of super information in here. So excuse me if I ask stupid questions, but I'm on a very step learning curve.

By the way. I was told from by a dealer that a adapterring for the M-size issue, for the Nexus, is somewhat of a permanent thing that requres specilised tools to mount and desmount. I was hoping that it would be a quick ring fix kind of thing, but apperently not.

Is there really no local (Scandinavian/german/UK) seller or knowhow person in my part of the world?

Kind regards
Peter

In Topic: Anthis/Nexus M-Size's ?

20 November 2008 - 09:12 AM

Hi,
I had same reaction when I saw they are changing the port. I think they will
be making new housings with M6 port (d300 & d700...) but, did not see d200
with M6 port yet. One of my friend got d200 housing from factory last week & was
still M5 port.

and wish you a Good luck with new gear.

Best, Sam



Thanks Sam

I have just been mailing with Tom fram Marinecamera who confermed the M5 size, so I'm a beliver. I just can't understand the rubbish from the scematics on there homepage. Maybe its just one of those things in life.... :)

On another topic.....As long as we are Reading/writing... :P What about those upgrade kits for the D200, Do you sell/make them or what, You haven't answerd my PM...

Thanks, Peter/Zaritas

In Topic: Anthis/Nexus M-Size's ?

20 November 2008 - 07:47 AM

Zaritas or Peter,
Nexus d200 housing you purchased from e-bay has M5 port. For your 12-24 ring gear, I would suggest
to contact one of sponser here. Marine Camera Distributer is Nexus dealer in US. You can also, ask them
about factory modification to d300.

I think it could be a lot easier to get answer if you were telling here what do you need from beginning....

Sam



Hey Sam

You seem to be the smartest man in here when it comes to Nexus, so thanks for replying :)

What I need is to know what portsize I use.... Because I'm allways looking for ekstra gear eg. http://cgi.ebay.com/...em=270301149028

The seller also told me that my housing is M5.... But why does the manufactor claim (look up to the top graf) that its only made as M4 or M6 option size??? Maybe I'm a bit slow in the head :P but that dosent compute...

In Topic: Nexus parts - zoom gear for Nikon 12-24

19 November 2008 - 11:57 AM

Zaritas - You need to get in touch with steve at Ocean Optics - http://www.oceanoptics.co.uk/ partners with Mavericks. They stock nexus gear for sure.... Matt



They just replyed a mail from me and they don't sell Nexus anymore :P

In Topic: Anthis/Nexus M-Size's ?

19 November 2008 - 11:28 AM

You dealer should know. I suggest you look at the port part description. e.g. I have a D80 which is an M5 and port PNs *****-5.



Thanks, for the suggestions. Ofcourse I have tryed to contact several sellers and directly to the manufactor, but I don't get any answers.

I have checked the numbers om my gear but can't make any sence of them, maybe some of you can.

My housing has a stampt number in both parts # 115108, I assume it's the serial #
2 extensionrings: Model 16303 PE20-5 00056 anthis Japan // Model 18316 PE20-7 00075 anthis Japan
Lens cap: Model 18307 PC-R-7 Anthis Japan
Port/dome: 13307-3 no. 01466 anthis japan

Again thanks for helping a :P newbie