The MK25 has adjustable interstage pressure anyway via the pre-load screw at the top end....
the only problem with adding shims is that it raises your intermediate pressure thats ok if your spring is at the low end of the acceptable range but if it is already near the high end then a shim will likely put it over the top,just as often it is caused by harmonic resonance over the end of the piston tube and this is much more difficult to get rid of the scuba pro kits come with several different hp seats and generally a mk 25 will have a + seat i have switched to a t seat in alot of these whistlers and it has solved the problem,you may have to adjust the shimming after switching seats to get the intermediate pressure back into spec but your tech should be able to figure that out no prob.
DuncanSMember Since 30 Oct 2008
Offline Last Active May 28 2012 02:47 AM
- Group Member
- Active Posts 255
- Profile Views 2270
- Member Title Sting Ray
- Age Age Unknown
- Birthday Birthday Unknown
Show Country Flag:
Camera Model & Brand
Canon A570 IS
Strobe/Lighting Model & Brand
10 bar slot stay, Inon bayonet Fish eye