Jump to content

sea squirt

Member Since 31 May 2010
Offline Last Active Sep 30 2014 07:33 AM

Topics I've Started

Lens release lever on Subal housing

25 January 2013 - 08:09 AM

I lost the little black cap off the tip of the lens release lever (see picture) from my ND20 housing rendering it useless (see picture) and a real pain if using a bulky lens like the Nikon 105VR. After a lot of searching I found a number of suppliers of caps of various materials.

The kind people at caplugs Europe (www.caplugs.co.uk) sent me some free samples and the SRC-125-16 did the job perfectly (see picture). As it is longer than the original cap it is unlikely to come off again. Works perfectly and took about 5 seconds to fix.

Hope this helps someone else

david kessel

WTB ikelite bulkhead for Subal ND20 housing

16 November 2012 - 01:44 PM

Need a second bulkhead for my ND20 housing
Have plenty of Ikelite leads so an ikelite bulkhead which would fit a Subal housing would be perfect if anyone is breaking down some old kit
the wiring is as shown - needs to fit the 5 pin connector on the right side of the picture