Jump to content


BOYDY

Member Since 17 Oct 2004
Offline Last Active Aug 07 2014 03:08 AM
-----

Posts I've Made

In Topic: Olympus O-MD E-M1 and Sea&Sea YS-D1 compatibility issues

05 August 2014 - 07:34 AM

Hi paratom what firmware is in your camera mine is 1.4

In Topic: Olympus O-MD E-M1 and Sea&Sea YS-D1 compatibility issues

04 August 2014 - 01:50 PM

Sounds good to me pal thx for the feedback you've been a great help

In Topic: Olympus O-MD E-M1 and Sea&Sea YS-D1 compatibility issues

04 August 2014 - 01:19 PM

The EV is always been on strobe but the inon worked great if the camera was on ttl and strobe on ttl EV on strobe set to 0 you got good ttl at 1/320 and f22 if I adjust EV on strobe positive it gives brighter photo and if I turn EV to negitive it gives darker photo like it should at any distance

In Topic: Olympus O-MD E-M1 and Sea&Sea YS-D1 compatibility issues

04 August 2014 - 12:29 PM

close macro is ok its when you go a little bit further away from the subject,if you leave the EV on 0 then its fine you just cant tune it any if over or under exposed but just went up to the mates plugged his inon s2000 onto my omd em1 tryed everything and all works fine


In Topic: Olympus O-MD E-M1 and Sea&Sea YS-D1 compatibility issues

04 August 2014 - 10:11 AM

Yes it works fine on manual always has done but if you want to use TTL after the setting i gave earlier the camera and strobe dont sync i.e 1/320 the highest F IF F14 and if you want to shot up at F22 then fastest shutter is 1/160 but on manual all is ok