vetren

Am looking for 2 to 3 units of the rubber eye piece that screws on to the Subal GS180 viewfinder. If anyone has them for sale or know where I can buy them, please let me know. Thanks much...

Dear Subal Friends,

This is from the ikelite website:

"Some housings that have two Nikonos style bulkheads are not always wired correctly to utilize dual strobes with one strobe attached to each bulkhead. Dual strobes (one connected to each bulkhead) may not operate correctly if both bulkheads connect all five conductors to the camera. Five conductors from each bulkhead would allow either strobe to operate TTL, but not both simultaneously. One should have five conductors and the other connect only three conductors for dual strobe operation.

We have seen Aquatica, Seacam, Nexus and Subal housings with two Nikonos style bulkheads wired with all five conductors connected to the camera, requiring a dual cord attached to just one bulkhead. The manufacturer should be able to tell you if their wiring is compatible with accepted protocol."

I am in this situation. Rather then buying a T or Y cable, as I prefer to use single wires, how do I remedy this problem and get both my strobes to flash together?

Thank you,

Ren

If you have other magnifying lenses for sale and have an accompanying adaptor to connect to the Subal 105VR port, please let me know. I am located in Singapore. Thanks much.

Hi All,

Am looking for a Subal GS180 viewfinder in good condition. If you have one for sale, kindly email me at limren55@gmail.com

Thank you,

Ren
(Singapore/Australia)