Jump to content


JohnLiddiard

Member Since 25 Feb 2005
Offline Last Active Dec 23 2013 12:49 AM
-----

Posts I've Made

In Topic: Microflash to fire optical strobes without using camera's flash

31 August 2011 - 10:09 AM

Build the circuit into a replacement for a cable bulkhead socket. That way you can convert a housing that does not have room for popup flash or any optical sockets to use fibreoptics instead of cables. Does it also mimic digital TTL? Or just manual?

In Topic: Aquatica AD7000 and Inon Z-240 with fiberoptic, Settings?

30 August 2011 - 09:00 PM

I'm afraid that Jean is right in this matter, my suspicion is verified, unfortunately, I have no light meter, but how do I check the strobe in this case??
I think I've got water into the electric contect a while ago, could that have any affect?? I mean that the electric contact is shielded with silicone or rubber??

/Anders

Swap the left and right over. Keep everything else the same. See if the effect reverses.

In Topic: Spare Air - Any opinions?

30 January 2011 - 03:42 AM

I'm now thinking about travel and diving elsewhere. I think a pony is a good idea for the UK but if I go elsewhere and they don't have pony options...


When overseas, most boats on a 2-dive trip give you a cylinder for each dive. Take a buddy twinning kit and a second regulator (the baggage weight increase is only really that of a first stage, as you don't need an octopus on either). You now have twindies that you can stretch over 2 dives. You can even use a bit more gas on the deeper first dive at the expense of a bit less on the second dive.

In Topic: Are video people smarter than stills people?

29 November 2010 - 01:42 AM

Give me a video camera and I have this uncontrollable urge to turn it 90 degrees for a nice upright portrait shot.

In Topic: Anyone uses knee brace under wetsuits?

14 October 2010 - 12:56 PM

I had a badly twisted ankle and did every dive on a week's liveaboard using duct tape to strap my ankle into a finning position and hold it there. About 3 wraps of tape in a figure 8 did the job.

I also regularly wear a back support under a drysuit.