Jump to content


trimix125

Member Since 05 Feb 2013
Offline Last Active Today, 12:13 PM
-----

Topics I've Started

WTS 2x Inon D2000 Type 2 & 1x Sea & Sea YS 110a

08 October 2017 - 06:35 AM

Hi,
have too much strobes, and will reduce the models to only two types...

So first two Inon D2000 Type 2 strobes.
Good working, never drowned.
Some marks of using them....
Each with a S&S strobe arm mount and two diffusors, - 0,5 in blue and -1,5 in white.
Asking 300.-€ per piece, including shipping in the EU.
Other countries please ask.

And second a Sea & Sea YS 110a,
bought used, good working order.
Some marks of using it.
Comes with diffusor
Asking 250.- € including shipping in EU.
Other countries please ask.
 

Regards,
Wolfgang


Sigma 18 - 35mm f 1.8 close up lens needed?

27 January 2017 - 10:24 AM

Hi,
just getting the gear for our trip together, and wondering if i need one???
Domes could be Sealux 200mm ( think its a F ) or Athena 170mm.
Minimum Focus distance 0.28m.

Any ideas???

Thanks a lot,
Wolfgang


Measurements from Nauticam or Sea & Sea Macro Ports

16 January 2017 - 07:36 AM

Hi,
trying to house my Nikon Micro 85mm,
i am looking for a as short as possible port to be able to use macro wetlenses as well.....
Housing is a Hugyfot, and they dont have a narrow macro port. 
So i would addapt a Nauticam or Sea & Sea.
Now i have to find out which port is the right.....

The Nauticam ports are very nice with the 67mm thread, and it looks like i can get a lot of different sizes ( every 10mm ).
But how long is a 18701 Macro Port 60 inside?
Would need the lenght from the inner glas side to the absolute end, and or the border to the housing.
And if possible in metric system ;-))

Then i can look which port will be the shortest possible for the combination with the adapter ring.

Thanks a lot,
Wolfgang


Sealux PS Macro Port dimensions

06 January 2017 - 02:18 PM

Hi,
hope here are some Sealux user, who can help me.

I have a Nikon D500 in a Hugyfot housing, and plan to use a Sealux PS port with a Adapter ring ( i have one )
Ps port, simply because of light possibilities and weight.
But i Need the lenght of the port inside to figure out which one will be the best solution.

Sealux has no dimensions on their page, and the Adapter will add some lenght,
so i hope some users here can help me.

Would Need the lenght from the front glas element inside to the end of the port.
Have some normal Sealux macro ports, but they are too long, so i then can find out which one will fit.

Thanks a lot,
Wolfgang