Jump to content


Pacifichiflyer

Member Since 10 Apr 2005
Offline Last Active Jun 27 2009 09:06 AM
-----

Posts I've Made

In Topic: Mashall Islands

18 August 2005 - 07:33 PM

Been to Majuro several years ago. Dive operations have changed. Check out

www.divemarshallislands.com
www.rongelapexpeditions.com

In Topic: Sea & Sea DX-5000G RAW (NC2592)-Compatability and SD car

12 August 2005 - 06:32 PM

Aloha,

Been away diving and just catching up. As I said earlier I have the Sea & Sea 5000G with Sea & Sea YS90 Auto strobe. I took this to Palau and Truk and was very happy with the results. I need work on postioning strobes, but camera did great. I visited my favorite dive shop on my last trip to Tokyo and handled the new 8000G camera. Have to buy whole outfit camera & housing but the guy did say the housing is the same and that the Ricoh Capilio GX8 is the same camera. Have seen some for sale on E-bay and going to check out a couple camera shops my next trip to Japan. Thinking of getting one to have a backup. Cheers.

In Topic: Strobe Problem with Wide Angle

09 August 2005 - 07:12 PM

Thanks for the pointers. Did not pick up on the difference in strobe placement for wide angle vs longer focul lengths. Will give it a try. Also still working on strobe aim. I have some pics where I intentionally pointed the strobe away from the subject and got some neat shadows. Will try that more.

Ron

In Topic: Strobe Problem with Wide Angle

04 August 2005 - 11:55 AM

Thanks for the replys. I have tried moving the strobe to different positions and that did not seem to do any good. I have a fisheye tray with two handles which are about 4" high. The strobe is mounted on the top of the left handle using two 6" ULCS arms and clamps. On the right handle I have a fisheye focus light on an 8" flexible arm. I have moved the strobe and focus light and even took shots with the focus light off and still sometimes get these reflections. I checked out , when I first built my setup. It shows putting the strobe out front of the lense and other postions so not sure this is a strobe placement problem.

Ron

In Topic: Sea & Sea DX-5000G RAW (NC2592)-Compatability and SD car

11 April 2005 - 12:59 AM

I know this is kind of a late post to this subject but I had the same problem and got an answer (at least I thought it was a good answer) from Sea & Sea. Here is what they told me.

Thank you for your inquiry.

As you know, jpg format is compressed data and is used for most software.
.tiff format is uncompressed data, so it needs more memories and takes more
time to proceed. However, this tiff format is little different from ordinal
.tiff format. In order to look at tiff formatted pictures, you need to
install software (DU10X) which is in CD ROM that comes with the camera.
Please install the software on your PC, open the pictures from memory card,
and save the pictures in your PC. It is still .tiff formatted data and you
can use Adobe or Photoshop.

As it turns out you must open each individual photo using the DU10X software then save them to your computer. You can then open this file using photoshop, photoshop elements or whatever photo program you use. That is a ridiculous time consuming process just to get a .tiff formated pictureQ! Yes it takes forever to write the pictures you take in NC2592 (Non Compressed tiff format) hardly worth the effort.

Hope this provides you some good info. I have emailed Sea & Sea several times and get replies within 2-3 days. I am using Panosonic Pro SD cards that are supposed to be the fastest possible. I just got my 5000G and am still learning it by using it on land before going under. I have a YS-90 Auto strobe that I was using with a sony housing. Any and all tips greatly appreciated.

Pacifichiflyer