Not Telling
Thank Luiz!
Another fact: the same day, the identical housing was received by my friend. He uses the same flashes (two Sea&Sea 120), and with the pin n. 1 removed, all works right for him!
A good story for the X-Files, right?
Best regards
Marco
passanisi
Member Since 29 Dec 2005Offline Last Active Feb 05 2006 06:01 PM
Posts I've Made
In Topic: D2X Flash Issues
29 December 2005 - 05:50 PM
First sorry for my bad english 
Ok, today arrived from Seacam the D2X housing, WITHOUT the pin n. 1 (see the photo below)
pin_D2X_tutorial.jpg 33.2K
241 downloads
I connected my two Sea&Seea YS120, and they fired, BUT no photo on memory card!
Ok, removed also the pin n. 4 (as recommended from Seacam http://seacamusa.com/d2x-hotshoe.shtml the same!
The solution (adopted last summer with a Nikon D70 and Fantasea housing): replaced pin n. 1 and 4, then removed pin n. 3 (see the photo below)
D2X_pin.jpg 101.82K
215 downloads
The flashes fired and finally the photo was on memory card.
The comment? NO COMMENT!!!
Ok, today arrived from Seacam the D2X housing, WITHOUT the pin n. 1 (see the photo below)
pin_D2X_tutorial.jpg 33.2K
241 downloadsI connected my two Sea&Seea YS120, and they fired, BUT no photo on memory card!
Ok, removed also the pin n. 4 (as recommended from Seacam http://seacamusa.com/d2x-hotshoe.shtml the same!The solution (adopted last summer with a Nikon D70 and Fantasea housing): replaced pin n. 1 and 4, then removed pin n. 3 (see the photo below)
D2X_pin.jpg 101.82K
215 downloadsThe flashes fired and finally the photo was on memory card.
The comment? NO COMMENT!!!
