Jump to content

carmelo

Member
  • Content Count

    9
  • Joined

  • Last visited

Community Reputation

0 Neutral

About carmelo

  • Rank
    Starfish

Additional Info

  • Camera Model & Brand
    Nikon D80
  • Camera Housing
    Nexus D80
  • Strobe/Lighting Model & Brand
    Z 240
  • Accessories
    UL
  1. NEW PRICES price $200    price $100  price $50    Anthis M5 Port Extension 10mm PE10-5 (never used) price $30 Price $20  
  2. I sell these ports because my Nikon D80 died. I have the housing too if anyone is interested. All material in perfect condition. Shipping from Spain Anthis Optical Fisheye Port NF10-5 for Nikon Fisheye 10.5mm f/2.8D Lens + Anthis Focus Gear FG-NAF10.5F28G for Nikon AF DX Fisheye-Nikkor 10.5mm f/2.8G ED Lens price $300 Anthis Flat Port MP105VR-7 for Nikon AF-S VR 105mm f/2.8G IF-ED + Anthis Focus Gear for Nikon AF-S VR Micro-Nikkor 105mm f/2.8G IF-ED Lens + cap and rear cap price $200 Anthis M5 Flat Port MP60-5 V2.0 for Nikon AF-S Micro Nikkor 60mm F2.8G ED + cap and rear cap price $150 Anthis M5 Port Extension 10mm PE10-5 (never used) price $50 NCL-80 Wet Close-Up Lens 80mm for Flat Ports Price $30
  3. I've finally built a plastic washer with an outside o-ring that not allows light through. It works ! Thanks to all. Carmelo
  4. Question: 1/100th triggers the flashes and can shoot them to full ?
  5. Thanks Gudge, I had not thought of that possibility ! I´ll try it !
  6. Hi jcclink, I always use the on-board flash set to TTL mode, but I can set to manual & power settings from full to 1/128th too. Does your external flashes work on TTL mode setting on-board to 1/100th ? I tried this a long time ago but didn´t work.
  7. Yes, I use them, but with the 10.5 fisheye, and buit in flash camera opened, its light gets into lens. Optics works well with 60 & 105 mm.
  8. Recently I acquired two Sea&Sea 5-pin Strobe Sync Cord/N for my Nexus D80 with NCC V3.04 connector. I have two Z240 strobes, and I have a doubt. Can I shoot on TTL mode with this configuration or only manual ? I have TTL insulation plates of Inon, but I don´t know if I have to use them or not, one or two ? Can someone help me ? Thanks, Carmelo
×
×
  • Create New...