Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by RBernardo

  1. Hi i supose you are using eletrical connection... the lower right buton is in "down" position?
  2. Hi go to www.subtronic.de ....
  3. Hi, so my question is the same... What is the correct configuration of the Subal ports for nikon D800 or D4 with sigma 15mm?
  4. here is the image... see the low right corner.... thx in advanced
  5. Hi Rob, thank for your anwser I begin to think that there may be a misalignment between the support of the camera inside the housing and the camera lens axis in relation to the dome... because your photos, with the 6'' dome looks fine to me.. kind regards
  6. Wow! very nice Mr Flecther!!!! i Have a 8'' dome and this solution is not perfet. The subal website gives another solution, wich is not suitable also..... I know that i have to buy a bigger dome, but should not work right with a 8'' dome? kind regards
  7. Thx for the reply Dr Alex, i also use a 6'' Dome and i also have the distortion in the corners. the question is, in fx mode should only use a bigger dome then the dome of 6''? in subal web site the information should not be correct? other subal users with this combo what extension rings are using? kind regards Rui
  8. Hello, what port combination should i use with Nikon D800+Sigma 15mm? In the Subal website, the port combination says DP-100+exr15, but combo doens't work, Only with the DP100 also distorts the image in the corners. What combination should i use then? kind regards thx in advance Rui
  9. Hello, can someone help me by telling me what is the reference of the battery the alarm subal ND800 housing? kind regards
  10. Hello i already try several holders and chose SAGA DIVE holder, they also have the lenses +10 and +5 http://www.sagadive.com/index.php?cPath=133 very accurate and very practical
  11. Hello, i am selling my underwater Nauticam housing for Nikon D800, i include a pair of handle brackets, and a pair of mounting adapter for inon ball, a ball mouting strobe and two fiber optic cables for inons z-240, for 3000€, the housing is like new, 10 dives, in Portugal i can send pictures of the housing
  12. Hi, The use of teleconverters, does not make the focus slower? (i have 2 tc, one from nikon, (TC-20E III Teleconverter) heavier and do not fit in 60mm, and is much slower comparing with the kenko 2x teleplus pro 300 dgx, i think that does not compromise the quality of the zoomed image..)
  13. I have tried with the nikon teleconverter TC-20E III and woks just fine, also tried with the Kenko pro 300 dc 2x and works fine... no problem at all the detail is superb...
  14. Hello, i am lucky, i already try this new SAGA snoot. I can say is very good. To point, there are no better. I recieved mine yesterday, tested in the pool..., i believed that is the best snoot in the market. And the most important thing is that i use INON, as you all know, the pilot light is not the center ..., very happy with the fist tests kind regards RB
  15. Hello, someone uses the SB900 flash underwater? What is the max speed of synchronization? thx for help RB
  16. Hello again Wolfram, i do not use a Y cable, my housing (Patima) have two bulkheads, i use two simple cable, but i also have a Y cable, and i did not had that test, but i will do it... let me see if i understand what you are saying..., if i had my strobe not connected to the board, and then i connect them (one or boht?) i shoulf see a green light flashing? the light i see is a red one flashing, not green even when i replace the batery,a few days ago, the red light flashes for a second or so.., but its red not green. Is this a sign of someting broken? i am very grateful for the help Kind regards RB
  17. Another question Wolfram, where did you bought your board? Kind regards RB
  18. Hello, let me tell you, you are a luky guy!...., my board works fine with two inon z-240 type 3, but does not work with two inon's z-240 (type 2+type 3) and the answer that i had from "HM" was that one above........ i think that i will replace my ttl system for optical, for sure more reliable then HeinrichsWeikamp OEM TTL converter... (not need assistance from the manufacturer) thanks any way.... Kind regards RB
  19. i send an e-mail today, asking if there are any link in english, so i can try to read in the site... i do not know read or speak germam... but problably, and like HeinrichsWeikamp did not help me, i do have to do something, i will try to send an e-mail to Mike Finger... thank you for your help kind regards RB
  20. Yes, i do have the manual, i check all the connections, one guy from HeinrichsWeikamp, (Manfred Priest) told me to check all the connections, i have a diagram of the connections and its all ok. the thing is, if i connect only one strobe (type 3) it works, and i try in two bulkheads, as soon as i connect the strobe type 2, the ttl stop working. i have another housing, a subal nd300 with a different board (MKIII) and the same strobe works just fine!, but with the board MKI don't work and i do not understand what i am doing wrong... kind regards RB
  • Create New...