Jump to content

buleetu

Member
  • Content Count

    22
  • Joined

  • Last visited

Everything posted by buleetu

  1. hi all i have the e900 housing with an inon wet lens adaptor for sale live in ireland pm me or email buleetu@yahoo.co.uk
  2. hi all im thinking of getting a 2nd hand inon z220 i have a nikon d70 with an ikelite housing i have a kit lens which i dont use under water and a 60mm for macro,,which arms do i need to buy so it fits the ike and the inon also which sync cord do i need?? someone said the inon is optcally fired and the d70 flash doesnt open inside the housing so does this rule out this kind of strobe thank you to everyone
  3. hi all im thinking of getting an inon z220 which arm and sync cord would i need,,as i said i have a 60mm lens so ill be doing macro so what kind of arm do i need
  4. okay great,,,would u post to ireland or do u still wanna get someone to pick it up personally also i have an ike and nikon d70 will i need a different sync cord
  5. thanks lads,,, so why should the serial be higher than 70000,,is that just its age perhaps also ikelite made 2 housings for the d70 one with ttl and one without,,i have the one with out what can i do??
  6. hi there would u sell the strobe and arms etc.. on there own
  7. hi there i sent u a message on ebay but didnt know u were here too can u sell the strobe and the arm and that i have a nikon camera and ike housing, i think u have a canon so ill have to buy the ike wire
  8. yes chris ur right,,the camera flash doesnt open inside the housing,,it half opens but not enough to let the flash fire
  9. thanks chris i look into the strobes u mention and also the different ways to mount them,,, im not sure weather to buy a wide angle lens or a strobe first though,,,i already have a 60 mm lens for macro and i get some great shots with that and i think a strobe would help a lot,,,ill see which one i have the money for first,,the lenses i was looking at a quiet expensive so perhaps a 2nd hand one will do thanks again ill get back to u if i get astrobe for some advice im sure do i have to go with ikelight strobes because i have the ike housing or can i get any type of strobe
  10. hi all just wondering what strobe i need for a d70 with an ike housing,,there is a connection that goes to the hotshoe on the inside of the housing with a socket on the outside what do i need eg arms and cables to fire the flash thanks
  11. hi all i have a nikon d70 and ike housing do any of u have one,or are u familiar with the housing,im having a bit of a problem i think im greasing up my housings knobs and buttons getting ready to go away to the red sea yeah know the turny thing right below the shutter release button,,it has 3 cogs attached inside the housing for adjusting shutter speeds or something,,the main cog inside the actually turns the slide on the camera has a bronze screw on it,,i took it off to take the whole assembly apart to clean and grease and now ive noticed the the small steel plate that the bronze screw goes into is actually turning,,its shaped like a 50 pence peice (pentagon like?) i popped it out and has a double o ring, but now that ive put the whole asembly back together the 50 pence peice shape still turns,,, is this gonna leak or is the double o ring there to stop this happening thanks everyone
  12. hi all i have a nikon d70 and ike housing do any of u have one,or are u familiar with the housing,im having a bit of a problem i think im greasing up my housings knobs and buttons getting ready to go away to the red sea yeah know the turny thing right below the shutter release button,,it has 3 cogs attached inside the housing for adjusting shutter speeds or something,,the main cog inside the actually turns the slide on the camera has a bronze screw on it,,i took it off to take the whole assembly apart to clean and grease and now ive noticed the the small steel plate that the bronze screw goes into is actually turning,,its shaped like a 50 pence peice (pentagon like?) i popped it out and has a double o ring, but now that ive put the whole asembly back together the 50 pence peice shape still turns,,, is this gonna leak or is the double o ring there to stop this happening thanks everyone
  13. im new to the forum so hello to u all i am buying a sea and sea housing for my nikon d70 from one of the guys on the classified page and i need to get ports the thing is the ports for the lens i have at the moment are very expensive and when i asked this question on scuba board: "d70 good camera?" someone replied that if i had a 60mm lens or a wa angle lens then it would be worth my while but if i was to keep the zoom kit lens which is the 18mm-70mm i would be better off sticking with the e900 i have for the time being the thing is with the price of the ports for the 18mm-70mm lens i already have, its a bit of a large investment for me at the moment so should i not bother getting the ports for the lens i have at the moment (18mm-70mm)and when i do have the extra few bob saved up then buy the ports for the new lens i decide on what do u think guys and which other lens would u recommend if the zoom lens i have now is no good to me underwater thanks
  14. sent u a pm there daniel not sure if i sent it properly or not new to this forum
  15. thanks for the help daniel ill have a look at the sites u mentioned and post here too ill get back to u tomorrow thanks again and also thanks to the other guys that posted here, im living in ireland
  16. i had no idea the ports were so expensive, it comes to 534.97 for the 3 parts i need....wow ill check ebay do u know anywhere else i can get the 2nd hand ports
  17. okay daniel i will go and find out about the ports and get back to u right away, im really excited now haha could u post some pictures u have a taken with it and maybe some pictures of the housing too
  18. hi daniel hope u havent put the housing up on ebay yet, im defo interestedin the housing,, i have a d70 i got a link to this website from scuba board sorry im late i have been busy since i posted on scuba board, hope u havent put it up there yet it says the housing isint being made anymore would that mean i wouldnt be able to get new ports hit back thanks very much
×
×
  • Create New...