azcaddman

-sold-

Used, but never flooded housing for OMD EM5-mII includes aftermarket leak detector, spare body o-ring (not used), front cap. very good condition, no scratches on port. will ship in orig boxes $350usd plus shipping from Canada (local pickup available in Oshawa area) pm if you need any additional photos

You can also order from http://www.divervision.com/howshot-spare-o-ring-for-ys-fiber-adapter-FA-OR.html?search=howshot%20o-ring (i've ordered the howshot cable ends, they work fine with generic toslink cables )

here's the email I send my dive buddies, when they ask where to get glove like my wife & I have used for the last couple years. weist seal is intact, so you can switch back to wet gloves if you need to. I just put the liners on, then the suit, with the wrist seal sitting on top of the liner, this lets the air (slowly) equalize between glove & suit. if you get a leak, take the gove off, & pull the liner from under the seal, put the glove back on. Some people use straws etc to equalize, but i've never tried that option. only had 1 flood, after the glove was cut somehow... 2 min later, new glove installed, and back in business (wrung the water out of the liner, and used it on the 45 min dive, still warm) http://comdive.com/ringkits.html is the place for the Viking dry gloves .. the bayonet system is the one you want. Don’t bother ordering with any gloves, just the basic kit.. tell him you were referred from decostop, might get a better price. Then get atlas 620 gloves http://www.go2marine.com/product.do?no=34379F http://www.campmor.com/outdoor/gear/Product___92853 are the gloves we really like.

sold a while ago, thought I had closed this thread.

all items SOLD

all items SOLD

1 ucl165 lens left.

email sent.

1 person is ahead of you on the cables james.. if it falls thru, they're yours. Art

shipping - USPS priority international would be $25.00, I would split that with you, so cost for 1 lens, shipped would be $112.00 payment - I would prefer paypal condition - the optics on both lens are clear, no scratches etc. the threads on both are also good. the outer body (paint) has some small chips, as you can see in the photos http://www.malone-az.com/for-sale/inon-165/ this is only cosmetic, does not affect its use at all. If you wanted both lens, I would cover all the shipping, total cost to you would be $200.00

Inon 100° wide angle lens, SOLD ---------- Inon UCL-165M67 Macro lens (2 availible, price is each) The UCL-165M67 close-up lens has a 165mm focal length and makes high magnification close-up photography possible by shortening the close focus distance, allowing the photographer to get closer to the subject. Also, the lens is designed to work effectively both above and below water, allowing the photographer to capture macro subjects above water, and in wet or splash type environments. Large photos at http://www.malone-az.com/for-sale/inon-165/ $100 obo (each) incl shipping/insurance (to US address) (USPS Priority)

Ikelite SS200 strobes (3 availible, price is each), works with film cameras (TTL), and digital cameras , if used in combination with 4100 slave sensor (ornange ones) and if the camera has manual flash control(no pre-flash). I have personaly used this setup with canon s70, and a640 cameras, it will work with others that have manual settings. all are in good condition, no corrosion in battery compartments, never flooded, all have been used in the last 2 months, batteries all hold a good charge (shows 3 bars on the battery check function of strobe) Ikelite was offering the option of converting SS-200's into DS-200's about a year ago, I'm not sure if this is still an option, feel free to contact ikelite and find out. each includes 1 battery, protective cap for cord connection, extra o-ring (new), and diffuser Large photos at http://www.malone-az.com/for-sale/strobes/ $250 obo (each) incl shipping/insurance (to US address) (USPS Priority) Also availible are 2 chargers for these strobe batteries. (not for NIMH battery packs, just the NICAD ones) $30 (each) with any of the strobes. Also availible is 1 spare battery, for $10 with any of the strobes. ---------------- Ikelite 4100 Slave sensor (3 availible, price is each), works with film cameras (TTL), and digital cameras (Camera must have Manual flash control, and strobe power level is set manualy on the strobe. I have personaly used this setup with canon s70, and a640 cameras, it will work with others that have manual settings) each includes new batteries, and cord end protector (delrin), fully functional, were used a month ago with ss-200 strobes with no problems. Large photos at http://www.malone-az.com/for-sale/slaves/ $75 obo (each) incl shipping/insurance (to US address) (USPS Priority) ------------ Ikelite 4102.03 strobe cable extensions (2 availible, price is each) 3' long, in good condition, cable ends are clean. Large photos at http://www.malone-az.com/for-sale/cable%20extensions/ http://www.ikelite.com/web_pages/sync_cords.html $45 obo incl shipping/insurance (to US address) (USPS Priority)

Canon A-640 Camera, 2 sets of 2700ma nimh batteries, 2gb Sandisk SD memory card, Ikelite Housing, extra o-ring for housing (unused). Camera has been used exclusivly in the housing, so no dust/dirt etc, probably 2500-3000 photo's taken total. In near mint condition. Includes manuals, orig box etc. Housing is 2 years old, minor scratches on sides & back, front port is not scratched in any way. extra o-ring for housing included. Flash difuser blocking plates both included. large photos at http://www.malone-az.com/for-sale/a640-housing/ $525 obo incl shipping/insurance (to US address) (USPS Priority) ---------------- Ikelite double arm base tray, with custom top bar, and video base, and quick relase for base. top bar is from a DSLR setup, then cut down to fit the double arm base tray. Large photos at http://www.malone-az.com/for-sale/double%20tray/ http://www.ikelite.com/web_pages/udigacces.html Ikelite Part Numbers 9523.32 0612.7 9360 70.00 obo incl shipping/insurance (to US address) (USPS Priority) -------------- Ikelite 1.25" strobe arms, and various clamps, & Parts prices are 1/2 of what they sell for on B&H, if you find a lower NEW price, let me know & I'll sell the part for 1/2 that. Qty . Ike Part No . Description ............ Price (each) 2 .... 9577.42 ..... for DS-200, Ai, 100A ... $10 7 .... 9577.2 ...... clamp for 1.25" arms ..... $18 3 .... 9577.3 ...... mounting stem (short) ... $10 4 .... 9577.1 ...... Ball at tray 1.25" ........... $10 4 .... 0468.06 ..... ball arm - 6" long .......... $18 Large photo at http://www.malone-az.com/for-sale/arm-parts/ prices do not include shipping/insurance, willing to deal on for multiple items.

It's got a favorable review at Luminous Landscape - both for low noise, and fast (for digicam) focus.