Jump to content


  • Content Count

  • Joined

  • Last visited

Community Reputation

0 Neutral

About colinm

  • Rank

Additional Info

  • Show Country Flag:
  • Camera Model & Brand
    Canon 450D
  • Camera Housing
    Sea & Sea RDX 450
  1. Thanks for the replies guys. I went to the local Apple shop, and the 'Genius', was saying that unless Apple issue an update to return the RAW functionality, then for the time being anybody with IOS 8 is screwed.... Atobit. Getting the RAWs back off the iPad is easy if you are using a Mac. You just use Image Preview to import them into a folder. Not sure what the deal is with a PC. Cheers
  2. Hi I use my iPad on holiday to save and review my photos. I made the mistake of updating my iPad from IOS 7 to IOS 8, and now trying to scroll through my uploaded RAW images is so slow, it is painful, and pretty much useless. What are others doing to get some level of usability out of iPads with IOS 8 when reviewing RAW images? Thanks
  3. Thanks for the input guys. A few things to check out. Great hammerhead. Sorry I forgot to mention it originally. The ACC circuit is engaged. The button is pressed in.
  4. Needing some help here. I've got a 7D and I'm not sure if I've messed with a setting but it has started to pre-flash a lot. The setup is the camera's own flash on manual at its minimum power, a couple of Z240s on manual, and a FIX500 as a focus light. I'm wondering if the camera's own flash being on 1st or 2nd curtain would make it more or less prone to pre-flash? All help, and suggestions most welcome. Cheers
  5. I sold my RDX450D to a guy who had a 500D. From what I remember both cameras have exactly the same buttons and button locations and so will fit in the 450D housing. I think the problem comes with the 550D as the camera is ever so slightly bigger.
  6. Hi Chas I had a similar issue with my Fix500LED earlier in the year. I contacted FIX in Japan, and my light was fixed without any issues The service was great. Might be worth contacting them. I've figured out how to get the rotary switch apart on mine, but it is not easy to figure out how to do it. Once you know, it's easy, but you could easily damage it trying to figure it out. You basically have to make a thin 90 degree tool that you can slide under the edge of the rotary switch in order to push the face off. Once you do this, you can start to unscrew and dismantle the switch. Have fun!
  7. I'd like to thank FIX Fisheye for repairing my flooded light. Even though it is a number of years old it was repaired at no charge. Great service!
  8. Thanks for the replies guys. I'll contact FIX and see what the go is.
  9. I always travel with my camera inside the housing. Always make sure you remove the 'O' ring from the groove before closing it up. Otherwise, opening the housing when you land again can be very hard due to the housing equalising to the lower cabin pressurre at altitude and then being held shut by he higher external pressure when you land. Pelican cases have a pressure equalising valve to counter this. I always put bits of coloured paper beween the housing halves to remind me that the 'O' ring is not in its groove!
  10. Nice shot. I've tried it once myself. Set the timer on 10 seconds, and set the camera to take 5 shots. My new camera unfortunately doesn't have the multi shot self timer function.
  11. Hi, My FIX LED500 focus light had just enough of a flood to cause it to stop working. I've taken the light apart and it looks as though the water came in through the switch, as the two components on below the switch showed signs of water ingress. Anyone else had a similar issue, and importantly, were you able to have the light repaired? cheers
  12. I'm in the process of buying a Nauticam housing for my recently purchased 7D. Looking at the port chart I see there is a couple of options when it comes to ports for macro lenses. I've got a 60mm and 100mm, and my questions are: 1. Should I buy the dedicated macro ports or buy the compact port base and appropriate compact ports? 2. What are the pros and con of both set up. Ignoring for now the extra O ring with one set up. Thanks in advance
  13. Thanks for the information contained in this thread. It has made things clearer for me as well. Am I correct in thinking that whatever colour the print is on the options on the left hand dial, (yellow, white, or green), then this corresponds to the different coloured control options on the righthand dial?
  14. Hi Sylar, I wouldn't be buying any fibre cables that have a Nauticam connector. You are wanting S&S to Inon. I'd give Peter a call. He's just up the road from you, and the picture of the cable he posted is the same as I have. Cheers Colin
  • Create New...