spon

yes, everything listed is still available.

Here is the list of what I have left. Everything is ikelite unless otherwise specified and I have one of everything unless otherwise specified. Prices listed are MSRP. - Port Body - #5510.22 - Port Body for lenses up to 4.000" with Flat or 4.125" with Dome $150 - Flat Port #5508.45 Canon 100mm 1:2.8 EF USM Macro $200 - Neoprene Port Cover #0200.5 Covers all ikelite flat ports $20 - Release Handle Extender (1" Ball) #9571.3 $25 - (2) Ball-to-Ball 22cm (9") Arm Extension (not Ikelite, not sure of brand) (1" Balls) $45 - Ball Clamp #9571.2 (1") Balls $40 - Ball with DS50, DS51, DS125, DS160 Mount #9571.4 (1" Ball) $25 - Aquatica TLC 11" arm double ball $40 - Pelican 1600 case with dividers $250 - Quantaray +1, +2 & +4 77mm diopters $70 I'll likely sell the remaining items for ~60% of the prices listed.

yes, the ball handle extenders are the standard #9571.3 part number. It looks like shipping Priority Mail International to Norway is $23. I can likely get the cable and one or both extenders in the same box with the same shipping cost.

Yes Triggerfish, that is the dual sync cable for dual strobes.

Here is the list of what I have left. Everything is ikelite unless otherwise specified and I have one of everything unless otherwise specified. -Port Body - #5510.22 - Port Body for lenses up to 4.000" with Flat or 4.125" with Dome $150 -Flat Port #5508.45 Canon 100mm 1:2.8 EF USM Macro $200 - Neoprene Port Cover #0200.5 Covers all ikelite flat ports $20 - (2) Release Handle Extender (1" Ball) #9571.3 $25 ea - (2) Ball-to-Ball 22cm (9") Arm Extension (not IkeLite, not sure of brand) (1" Balls) $45 ea - Ball Clamp #9571.2 (1") Balls $40 ea - Ball with DS50, DS51, DS125, DS160 Mount #9571.4 (1" Ball) $25 ea - Aquatica TLC 11" arm double ball $40 ea - ICS-5 Digital TTL Dual Sync Cord #4103.52 $160 - Pelican 1600 case with dividers $250 - Quantaray +1, +2 & +4 77mm diopters $70 Ideally, I'd like to sell it all together, but that might not be practical. If I sell items separately, I'll likely sell them for ~60% of the prices listed.

I sold a strobe and a few other parts today. The list of what is left is below (it doesn't look like I can edit my original post any more). This can all be yours for $2200 or make me an offer if you are just after a few parts. 8” Dome Assembly #5510.45 Dome Assembly (Port Body below) $400 Zoom Clamp and Sleeve Zit #5509.28 $20 Zoom Sleeve #0073 Zoom Clamp #9059.8 $20 Neoprene cover for 8" dome assembly w/shade # 0200.81 $35 Port Body - #5510.22 - Port Body for lenses up to 4.000" with Flat or 4.125" with Dome $150 Canon 50D & 40D Housing #6870.50 (with maintenance kit) (Pre Nov. 2009 with 3 clamps) $1500 Flat Port #5508.45 Canon 100mm 1:2.8 EF USM Macro $200 Neoprene Port Cover #0200.5 Covers all ikelite flat ports $20 (3) Ball with extended length stem #9571.3 SA-100 2.5cm (1") Ball $25 ea (1) Ball-to-Ball 15cm (6") Arm Extension #0466.62 SA-100 2.5cm (1") Balls $30 ea (2) Ball-to-Ball 22cm (9") Arm Extension (not IkeLite, not sure of brand) SA-100 2.5cm (1") Balls $45 ea (4) Ball Clamp #9571.2 SA-100 2.5cm (1") Balls $40 ea (2) Aquatica TLC 11” Arm double ball $40 ea (2) Ball with DS50, DS51, DS125, DS160 Mount #9571.4 SA-100 3.2cm (1") Ball ... $25 ea ICS-5 Digital TTL Dual Sync Cord #4103.52 $160 ICS-5 Digital TTL Sync Cord #4103.51 $100 (1) DS160 SubStrobe #4060.1 (one extra toggle pawl kit included) (only one universal charger) $900 ea Pelican 1600 case with dividers $250 Quantaray +1, +2 & +4 77mm diopters $70

I'll sell it all for $2800, just so I don't have to start parting it out. Any takers?

I have decided to sell all of my underwater camera equipment for a few reasons: (1) I could use the money, (2) I don't use it often enough (3) It's a lot of gear to haul on a trip, and finally (4) I am not skilled enough with the camera to take great photos as I was hoping all of this gear would magically make happen. I have over $5500 invested and have had it for about 3 years. (prices listed below are retail and what I paid) Here is the list of what I have, It's all in great condition and has been used on 4 trips. Everything is ikelite unless otherwise specified. 8” Dome Assembly #5510.45 Dome Assembly (Port Body below) $400 Zoom Clamp and Sleeve Zit #5509.28 $20 Zoom Sleeve #0073 Zoom Clamp #9059.8 $20 Neoprene cover for 8" dome assembly w/shade # 0200.81 $35 Port Body - #5510.22 - Port Body for lenses up to 4.000" with Flat or 4.125" with Dome $150 Canon 50D & 40D Housing #6870.50 (with maintenance kit) (Pre Nov. 2009 with 3 clamps) $1500 Flat Port #5508.45 Canon 100mm 1:2.8 EF USM Macro $200 Neoprene Port Cover #0200.5 Covers all ikelite flat ports $20 (3) Ball with extended length stem #9571.3 SA-100 2.5cm (1") Ball $25 ea (2) Ball-to-Ball 15cm (6") Arm Extension #0466.62 SA-100 2.5cm (1") Balls $30 ea (2) Ball-to-Ball 22cm (9") Arm Extension (not IkeLite, not sure of brand) SA-100 2.5cm (1") Balls $45 ea (4) Ball Clamp #9571.2 SA-100 2.5cm (1") Balls $40 ea (2) Aquatica TLC 11” Arm double ball $40 ea (2) UltraLight Control Systems (ULCS) AC-CS Ball Clamp $40 ea (3) Ball with DS50, DS51, DS125, DS160 Mount #9571.4 SA-100 3.2cm (1") Ball ... $25 ea ICS-5 Digital TTL Dual Sync Cord #4103.52 $160 ICS-5 Digital TTL Sync Cord #4103.51 $100 (2) DS160 SubStrobe #4060.1 (one extra toggle pawl kit included) (only one universal charger) $900 ea Pelican 1600 case with dividers $250 Quantaray +1, +2 & +4 77mm diopters $70 - I have boxes and manuals for the 8" dome, port, SLR housing and strobes (only one strobe box found so far) - As far as condition goes, the Pelican case is scratched on the outside from travel, but all the dividers are there on the inside. - The strobes have a few scuffs on the outer plastic edges, but the lenses are clear and unmarked. - The 8" dome shade has a few scuffs on the plastic edges, but the glass dome itself is perfect. - Everything else is in excellent condition. Batteries for the strobes hold a charge well. - I always remove all the compressed seals for storage and make sure that all have a light coat of silicon after coming home and cleaning up from a trip. Ideally, I'd like to sell it all together, but that might not be practical. I'd like to get $3200 for everything. If I sell items separately, I'll likely sell them for ~70% of the prices listed.

I have a Ikelite 40D / 50D housing that I am going to post up here along with ports and sub strobes Let me know if you are interested. stevenpon @ gmail dot com

Buyer: SPon Sellert: Iristyle Link: http://wetpixel.com/forums/index.php?showtopic=37742 I purchased an Ikelite DS160 strobe, dual sync cord and handle extender from Iristyle. His communication (and patience) was great. Everything arrived well packaged and works as advertised. Recommended!

Do you still have this equipment? I am interested in a strobe and the dual-sync cable if you still have them. Thanks.