Jump to content

tc_rain

Member
  • Content Count

    27
  • Joined

  • Last visited

Community Reputation

0 Neutral

About tc_rain

  • Rank
    Clownfish

Additional Info

  • Show Country Flag:
    --
  1. I am just looking to scan old photographs. As far as I know, there are no negs in the box. I will look into the Epson. The price range is right about where I would like it. Is there a certain feature or specification to look for in scanners that would tend to make them better for pictures than others?
  2. Can anyone recommend a scanner to scan old film pictures to a PC? My wife has what seems like a few thousand pictures that have been handed down through the generations that would be nice to scan onto a hard drive. I am looking for something that will do a pretty decent job but don’t want to spend several hundred dollars. I did a search through the forum but the most recent threads I could find were from 2012. I am thinking something better has come out since then.
  3. The PT-030 housing will not work with the E-410 camera. You need the PT-E03 housing.
  4. Thanks for the responses and the wealth of information. I want to stress that I have no intention of saying anything negative about the V3. I just realized when it flooded, I didn’t fully understand a vacuum systems limitations. Now I think I do. I also believe that temperature compensation is a must have to allow a lower vacuum in the housing. This should allow a smaller water intrusion to set off the alarm. A moisture sensor inside would be great. I also read where some have placed their wives maxi pads in the bottom to soak up water and prevent it from splashing around in case of a small leak. Unfortunately, I am still kind of new to this and never thought about manipulating all of the controls before submerging it. You bet I will from now on. I feel I really got lucky with this one since nothing was damaged except the housing and Ikelite took great care of me there. I may look into the V4 and will research moisture sensors some more. A couple hundred dollars spent to prevent is better than four thousand later. Thanks again.
  5. That is not what I am saying. I am saying it did not detect or alert me of the leak like I thought it would. I thought it would turn red underwater or at least above water if there was a leak.. Maybe I put too much faith in the concept. To add to that, i didn't think of this until typing this response, maybe the vacuum ascerbated the leak. I honestly don't know. That is the purpose of this post. I guess I really don't know what I should have expected. I thought if I got a green light above water I woud be safe diving with it. I also thought it would indicate if there was a leak underwater. I am not trying to say anything bad against a vacuum system, I just want to understand the reasoning of what happened.
  6. I bought a brand new Canon 70D and Ikelite housing. Worried about potential floods, I had Ikelite drill the housing and add a Leak Sentinel V3 vacuum system. An hour before my first dive with the system, I assembled the rig and activated the V3. It signaled a green light and I packed up my vehicle and drove to a dive site (was in Bonaire). Right before getting into the water, I checked the V3 again and observed a green light. Everything seemed fine as I was happily snapping away; checking the V3 occasionally throughout the dive and seeing it still was displaying a green indicator (vacuum holding). Approximately 30 minutes into the dive, I noticed a small droplet of water inside the housing. I look at the V3 again and it is still green. I immediately abort the dive and head for the surface. After a long surface swim with the camera out of the water, I make it to shore. By this time the housing is completely fogged inside and I fear the worst. I dry off the outside of the housing and try to open it but it wont open. The V3 is still displaying a green light. I bleed off the vacuum through the V3 and hear the hiss of air rush into the housing. I then manage to open the housing and find 3 or 4 tablespoons of seawater inside. Fortunately, the camera and lens were unharmed. I return to my room and fired off an email to Ikelite. I must say they are fantastic when it comes to customer service. They sent an immediately reply and even offered to send me a loaner housing to Bonaire. Due to all of the trouble of bringing two housing home through carry on I declined but it was very nice of them to make such an offer. While in Bonaire, I spoke with the owner of the camera shop at Buddy Dive and explained what happened. He stated he has been taking underwater photos for 20+ years with Ikelite housings and has never had a problem. He does not like the vacuum systems and explained how it draws / pulls on an O-ring differently than they were designed. He also said he understood the concept of the vacuum but it bothered him because it wants to pull air / water into the housing. He felt the vacuum systems were unnecessary. After talking with the camera shop owner and the fact my housing leaked underwater while still holding a vacuum, I am beginning to wonder if the vacuum system is worth having. Am I looking at this wrong or missing something? By the way, the housing was sent back to Ikelite and I was informed the shutter gland had worked loose. They rebuilt the gland and replaced all electronics free of charge. I cant say enough good things about the way they handled everything.
  7. Still for sale and I am located in illinois
  8. I have switched to a DSLR and no longer need the following equipment. Neither the cameras nor the housings have ever been flooded. I used the system for a couple of years without any problems. Everything has been well cared for and the owner manuals are included . There are basically two complete camera systems here that I would like to sell as one complete package so I don't have anything sitting on the shelf collecting dust. Plus, this way you would have a complete back-up of everything. $350 plus shipping Ikelite housing with dual handle tray Olympus PT-030 housing with single handle tray Inon AD Base mount Inon UCL-165 AD lens Two Olympus SP-350 Cameras (8MP) Extra O-Ring for PT-030 housing Enercell battery charger with two batteries Olympus XD camera cards 1GB & 2GB Olympus adapter tubes (37mm & 45.6-55) Olympus WCON-07 wide angle lens (topside only) Note- cannot find the adapter tube for the wide angle lens (topside only) but can be purchased on EBay or the Olympus website.
  9. No problem at all. The bottom knob is the lens release so I won't need to use it underwater or with gloves on. The top knob is the manual focus. It is large enough and exposed enough that the thickest gloves wouldn't present a problem.
  10. Here is the Leak Sentinel V3 I had installed by Ikelite on my 70D housing. Since I didn't want to lose any control functions on the housing, I sent the housing and the V3 to Ikelite asking them to drill a new hole and install the unit. The unit can be easily seen from the back and is not in the way of any controls. Ikelite charged $75 to install it and the housing maintains the warranty. I just wanted to present some options to those with an Ikelite housing thinking about ordering the Sentinel. Since I just switched from a P/S to a DSLR and am waiting on ports, I have not had a chance to get the system underwater yet to test it.
  11. I know the question of glass vs acrylic has been asked a few thousand times but all of the searches seem to apply only to dome ports. Does this also apply to the flat ports since the area is much smaller and the cost is considerable cheaper? What do you use (glass or acrylic) and why? Ikelite points out weight on their port finder website but I can't imagine there would be much difference in the flat ports but I could be wrong.
  12. With the way the Ikelite ports attach, do the port clips loosen when the housing is put under a vacuum?
  13. Is anyone using an airlock/vacuum system on their Ikelite housing? If so, what are your thoughts? I have searched the Ikelite website and don't see where they offer one, so I guess it would have to be an aftermarket purchase and install. From what I have read, it sounds like a pretty sensible item to have. I found that it is standard on the Nauticam housing (for my camera) but it is over double the price of the Ikelite housing. I am wavering between the Ikelite and the Nauticam housings. I thought maybe installing the airlock/vacuum system on the Ikelite as a possibility too.
×
×
  • Create New...