Jump to content

scuba300

Member
  • Content Count

    14
  • Joined

  • Last visited

Community Reputation

0 Neutral

About scuba300

  • Rank
    Sea Nettle

Profile Information

  • Gender
    Male
  • Location
    Orange County, CA

Additional Info

  • Show Country Flag:
    --
  1. FYI, for all you vintage collectors - I just posted the following 1950's vintage housing on eBay at: http://www.ebay.com/itm/1950s-VINTAGE-Underwater-Camera-Housing-VERY-NICE-/141096768790?pt=US_Camera_Underwater_Housings&hash=item20da05d516 If you happen to know anything about it please contact me. It's only on for five days, so check it out. Thanks!
  2. This is another of my Hasselblad housings and it is perfect for the Hasselblad collector or for actual use. It is a very unique opportunity in that it includes the standard front half, the port extension for the 50mm lens, both of the rear halves (one for the 500C/M and one for the SWC) AND A CUSTOM MADE MACRO PORT EXTENSION. This gives you the flexibility to use it for the 50mm, 80mm, 38mm (SWC), and a 120mm macro with two 55mm extension tubes. The macro port extension allows you to shoot amost 1:1 macro by using the 120mm lens with two 55mm extension tubes. By adding a close-up Proxar lens you can get more than 1:1 macro. It does not have any exposure or focus control, use your lighting position to adjust exposure. It actually worked quite well the few times that I used it. It does need to have a focusing light though. I haven't used it in a long time, but it worked great then and is still in incredibly good condition. I don't think that it has ever been used with the SWC back. Never had any leaks. I had Gates change out one of the flash bulkheads to use a Nikonos five pin instead. I also added a leak detector. Includes: - Front section for 500C/M, 500C, and SWC - Rear section for 500C/M, 500C - Film advance adapter for 500C/M, 500C - Lens support ring for 80mm lens - Extension set for 50mm lens - Rear section for SWC - Film advance adapter for SWC - Shutter release adapter for SWC - Original neck strap - Frame viewfinder for the SWC - Custom made port extension for 120mm with two 55mm extension tubes - One set of gears - Wrench to remove the port - Extra o-rings and screws - Original flash bulkhead that was replaced with Nikonos 5-pin - Leak detector Contact me immediately if you are seriously interested in it. I have one offer on it but I have not accepted it yet as it is a bit low.
  3. SOLD! I hope that the new owner enjoys using it as much as I did!
  4. I still have this housing available. Price is $2,200.00 This is the H-38 underwater housing made for Hasselblad by Peterson / Gates. It fits the Hasselblad SWC/M with a CF lens. The housing was manufactured by Gates Underwater Products whose housings are known to be of the highest quality available. Only about 60 of these housings were ever made. This is my personal housing and I am the original owner. I have had it down to around 140 feet and it has always worked flawlessly. It has never had any leaks of any kind. It is in excellent condition - not perfect, but close to it. I have always been meticulous in maintaining it. The kit includes: - the front and rear halves of the housing - the original dome port - view finder - gears for aperture, shutter speed, focus - for Hasselblad SWC/M with a CF lens - leak detector - adapter for shutter / film advance - base / mounting plate for SWC/M with a CF lens - Proxar 2 closeup lens - extra o-rings It is ready to be used with Nikonos flash cables. The dome is extremely clean I spoke to Lee Peterson at Marine Camera Distributors (the original designer) and he said that a viewing window can be easily added to the back for use with digital backs and that it is awesome with Phase One digital backs. Let me know if you have any questions.
  5. Yes, I still have the housing available. It's all boxed up and ready to ship if anyone is interested in buying it. Let me know if you're interested. Thanks!
  6. Hi Matowsky, Yes, I still have the Hasselblad housing available. Let me know if you are interested. Thanks
  7. I have now listed this for sale on Ebay with additional photos.
  8. PRICE REDUCED TO $115 each. Buy them now as I will be putting them on Ebay this weekend! Thanks!
  9. I have two Nikonos SB 105 strobes that I only used as backups. They have maybe five dives on each. I also have the original boxes and shipping boxes. They are in almost mint condition. I'll sell them for $135 each or $250 for the pair (plus shipping from California). Thanks
  10. I am selling my Hasselblad H-38 housing and wanted to give you guys a chance at it before I put it on Ebay. Will consider a REASONABLE offer. Let me know if you have any questions or want to see more photos. Thanks! -------------------------------------------------- This is the H-38 underwater housing made for Hasselblad by Peterson / Gates. It fits the Hasselblad SWC/M with a CF lens. It was also made to fit the 903 SWC but will require a different base plate which is NOT included. The housing was manufactured by Gates Underwater Products whose housings are known to be some of the finest available. This is my personal housing and I am the original owner. I have had it down to around 140 feet and it has always worked flawlessly. It has never had any leaks of any kind. It is in extremely good condition - not perfect but close to it. I have always been meticulous in maintaining it. The kit includes: - the front and rear halves of the housing - the original dome port - view finder - gears for aperture, shutter speed, focus - leak detector - adapter for shutter / film advance - base / mounting plate for SWC/M with a CF lens - Proxar 2 closeup lens - extra o-rings It is ready to be used with Nikonos flash cables. The dome is extremely clean I spoke to Lee Peterson at Marine Camera Distributors (the original designer) and he said that it can be easily modified to work with several different digital backs. Let me know if you have any questions.
  11. Did you ever sell the housing? How much were you asking for it?
×
×
  • Create New...