Jump to content

natz

Member
  • Content Count

    5
  • Joined

  • Last visited

Community Reputation

0 Neutral

About natz

  • Rank
    Starfish

Profile Information

  • Gender
    Female
  • Location
    maui HI

Additional Info

  • Show Country Flag:
    Australia
  1. Ikelite underwater Housing for Canon EOS 7D with IK5510.24 Port Body IK5510.45 8" Dome Port with Shade and Cover (In warranty) (http://www.ikelite.c...port_canon.html) here you can check which lenses fit this dome Spare Silicone Lubricants Spare O ring 2 x zoom rings used only a handful of times, for surf photography. I also have all the spare parts the housing came with. Excellent piece of kit.. can use nearly all the functions on the camera when in the housing, not like other housings that limit. moving between sydney and goldcoast $1450 ono cost new $2100 below is the spec for the housing http://www.ikelite.c...two/can_7d.html Depth rating: 60m Controls for all camera functions exceept multi-controller and flash pop-up. Extension lever on back panel gives ergonomic movie start/stop control. Interchangeable port system. Port is supplied separately.(Port choice depends on lens to be used). Super-Eye long eye-relief viewfinder optic allows full frame viewing with diving mask. eTTL2 conversion circuitry provides full TTL operation with Ikelite DS-series substrobes. Two substrobes can be triggered using a dual sync cord. Exposure compensation buttons on rear of housing gives ±2 EV control range in TTL mode, or 8 manual settings in ½ EV steps. Non-Ikelite strobes can be used in manual mode only (with appropriate sync cord). Dimensions SLR-DC: With tray: 13.25"w, 8"h, 6.5"d. Without tray: 9.5"w, 6.75" h, including knobs. Weight: ~3.25Kg, 7.15lb without port. ~3.6Kg, 8lb with port. Buoyancy: slightly negative (depending on port).
  2. Ikelite underwater Housing for Canon EOS 7D with IK5510.24 Port Body IK5510.45 8" Dome Port with Shade and Cover (In warranty) (http://www.ikelite.c...port_canon.html) here you can check which lenses fit this dome Spare Silicone Lubricants Spare O ring used only a handful of times, for surf photography. I also have all the spare parts the housing came with. Excellent piece of kit.. can use nearly all the functions on the camera when in the housing, not like other housings that limit. Im on Maui until around the 3rd Jan , after that i will be on Kauai so contact me asap if you are interested could also meet in california $1750 below is the spec for the housing http://www.ikelite.c...two/can_7d.html Depth rating: 60m Controls for all camera functions exceept multi-controller and flash pop-up. Extension lever on back panel gives ergonomic movie start/stop control. Interchangeable port system. Port is supplied separately.(Port choice depends on lens to be used). Super-Eye long eye-relief viewfinder optic allows full frame viewing with diving mask. eTTL2 conversion circuitry provides full TTL operation with Ikelite DS-series substrobes. Two substrobes can be triggered using a dual sync cord. Exposure compensation buttons on rear of housing gives ±2 EV control range in TTL mode, or 8 manual settings in ½ EV steps. Non-Ikelite strobes can be used in manual mode only (with appropriate sync cord). Dimensions SLR-DC: With tray: 13.25"w, 8"h, 6.5"d. Without tray: 9.5"w, 6.75" h, including knobs. Weight: ~3.25Kg, 7.15lb without port. ~3.6Kg, 8lb with port. Buoyancy: slightly negative (depending on port).
  3. Ikelite underwater Housing for Canon EOS 7D (body only) still in warranty only 8 months old , used only a handful of times, for surf photography. I have the spare parts it came with. I am based in the UK in windsor/LONDON (would prefer to meet in person, or will also post on ebay if shipping is required, which will be at extra cost) This unit sells in the uk for £1300 approx. im looking for £1050, its nearly new so price is fixed. THANKS below is the spec http://www.ikelite.com/web_two/can_7d.html Depth rating: 60m Controls for all camera functions exceept multi-controller and flash pop-up. Extension lever on back panel gives ergonomic movie start/stop control. Interchangeable port system. Port is supplied separately.(Port choice depends on lens to be used). Super-Eye long eye-relief viewfinder optic allows full frame viewing with diving mask. eTTL2 conversion circuitry provides full TTL operation with Ikelite DS-series substrobes. Two substrobes can be triggered using a dual sync cord. Exposure compensation buttons on rear of housing gives ±2 EV control range in TTL mode, or 8 manual settings in ½ EV steps. Non-Ikelite strobes can be used in manual mode only (with appropriate sync cord). Dimensions SLR-DC: With tray: 13.25"w, 8"h, 6.5"d. Without tray: 9.5"w, 6.75" h, including knobs. Weight: ~3.25Kg, 7.15lb without port. ~3.6Kg, 8lb with port. Buoyancy: slightly negative (depending on port).
  4. https://post.craigslist.org/k/NDTsbQWg4RGvN...pUchy?s=preview Hey I'm selling my Ikelite housing for canon 7dSee link aboveWill consider near offers... I have spare parts and hardly been used still in warrantySan Diego or LA area Need to sell latest by Monday 21st MayThanks Nat
  5. If it has sold I have the ikelite housin for the 7d for sale too ... Not with the camera https://post.craigslist.org/k/NDTsbQWg4RGvN...pUchy?s=preview
×
×
  • Create New...