Jump to content

motionsync

Member
  • Content Count

    631
  • Joined

  • Last visited

Everything posted by motionsync

  1. Off course they fit to Inon. Some photos from Internet AC-CSF & AC-CS: AD-HS: ACTRI tripod clamp with ball.
  2. 3 x AC-CSF - New style clamp is constructed slightly different than the original clamp. This clamp allows 15 degrees side to side movement of the balls. newer in the water still in original packing all 3 = 60 USD AD-HS Hot shue Adapter with Ball. 1-2 times in the water: 30 USD 2 x AC-CS - Standard clamp is used to attach two arms, base adapters, and strobe adapters together: 1-2 times in the water = 40 USD ACTRI, Tripod Clamp for use with any length arm to make a tripod inclusive ball adapter1-2 times in the water: 50 USD All ULCS PARTS together : 170 USD or best offer. Prefer to sell everything together Items are in Sweden / Europe. Paypal Only. Buyer pay Shippment
  3. Back and still analogue Have tested my polaroid Sx70 housing now, before summer comes, and everything is just fine but there is a issue with the finder. Is so hard to see and manual focus trough the Plexiglas to the finder so i was curious if its possible to add a Nauticam or Inon Viewfinder, or some of those inexpensive uw Camera Video Monitors Any ideas and suggestions?
  4. As its look lite the connector is a Ikelite ICS2 wet connector. So i need a sync cable as follow that connect to any manual strobe. Any idea ith those sync cables are still available?
  5. Thats more or les the same hier Dave. Sometimes we need to just let the child in us get free for a lite time. I just need, I must, take this housing underwater and shoot some polaroids . I will TEST some new Polaroid films soon and it would be intresand to see how its comming out with a strobe to. My main Problem is that i am not that good in technic and i dont know how i do to modify the housing to take underwater strobes. There is a bulkhead that is a 2 pin. so any manual strobe that in some way i can connect to this bulkhead will work. I need just to trigger the camera. Maybe somewhere there is a adapter for a sync cable. The other issue is that the camera works with strobes that have a guide number of ca 75 / 125 ASA But i think that with manual control of the strobe and Over Underexpose the Camera I can after some test find the sweet point.
  6. I think a guide number of 75 / 125 ASA or a leitzahl of 25 is way to much to find a strobe underwater... or is there something that powerfull?
  7. Finaly the housing have arrived. locks good but hard to se the finder.. About the strobe issues.. I have scan and add the manual that Ikelite had with the housing if somebody is curious to read...
  8. Jen Weird? ha ha i hear it a lot! I love polas and i really have a small project going one to use those Underwater. The original SX-70 exposure control is based on the focused distance. The original flashbars that they have been used with the SX70's equals a guide number of 75 / 125 ASA or a leitzahl of 25 so any flash that have this power works perfect with the SX70 off course overwater i am talking. So now i am curious if i can do something to create a housing that works underwater to and especially find a strobe that is so strong I can to modify a SX-70 so its shoot always in F8 indepented on the focused Distance so i can get the most out of a light. Otherwise.. available light shoots would do but this would be cool to use some extra light power underwater for some pool photos. P.S. I have off course asked Ikelite about some info as this is theres housing but they anwered that they have no idea ... sad sad...
  9. I have , finaly found a Ikelite Underwater housing for my Polaroid camera. Now dont ask why polaroids :-) Is there anyone that know this housing. As i see in the picture there is a connection that looks like its a strobe connection, if yes, is it posible to connect "modern" Strobes trough a adapter? /Lambis www.apneaimages.com/blog
  10. Sea & Sea Dual Sync Cord/N 5pin, New! New was used: 50 Euros SOLD Sea & Sea Single Sync Cord/N 5pin, used one time: 35 Euros SOLD 2x DB-12 L Arms: 35 euros, Both 60 euros SOLD 2x DB-8 M Arms: 30 euros, both 50 euros SOLD ULCS PARTS, all used 1-2 times, some parts newer in the water still in original packing. ACTRI, Tripod Clamp for use with any length arm to make a tripod inclusive ball adapter: 50 euros 2 x AC-CS - Standard clamp is used to attach two arms, base adapters, and strobe adapters together: 35 euros, both = 60 euros 3 x AC-CSF - New style clamp is constructed slightly different than the original clamp. This clamp allows 15 degrees side to side movement of the balls. 40 euros, all 3 = 100 Euros AD-HS Hot shue Adapter with Ball: 25 Euros All ULCS PARTS togehter : 200 euros Items are in Sweden / europe. Paypal Only. Buyer pay carriage. This post has been edited by motionsync: Aug 19 2008, 08:42 PM
  11. Sea & Sea Dual Sync Cord/N 5pin, New! New was used: 50 Euros Sea & Sea Single Sync Cord/N 5pin, used one time: 35 Euros Both Sea & Sea Cords: 70 euros ULCS ARMS & PARTS, all used 1-2 times, some parts newer in the water still in original packing. AD-HS Hot shue Adapter with Ball: 25 Euros 2x DB-12 L Arms: 35 euros, Both 60 euros 2x DB-8 M Arms: 30 euros, both 50 euros SOLD ACTRI, Tripod Clamp for use with any length arm to make a tripod inclusive ball adapter: 50 euros 2 x AC-CS - Standard clamp is used to attach two arms, base adapters, and strobe adapters together: 35 euros, both = 60 euros 3 x AC-CSF - New style clamp is constructed slightly different than the original clamp. This clamp allows 15 degrees side to side movement of the balls. 40 euros, all 3 = 100 Euros All ULCS ARMS & PARTS togehter : 300 euros Items are in Sweden / europe. Paypal Only. Buyer pay carriage.
  12. I am to thinking going back to UW photo after almost one year of Fashion shooting. The 10-17 sounds great. My question is how this lens will perform to a D300 DX camera and a 16mm to a D3 /d700 fullframe. I just have the feeling that this baby will do great in DX format. on the other hand a 16mm in a FX formal will be great to just i will miss the Zoomfactor
  13. btw... if we have Sea & Sea hier. How about the new 14-24 Nikon Zoom Lens. Is there any test done to see wich wich dome / extension it will work?
  14. One Hartenberger 250 TTL. A exelent Strobe, nothing more to say about this UW strobe - very fast and typical German quality. Strobe was on Hartenberger for service where i have: New Orings, Preasure testing : 1 Hrs / 80m Checking electronic and housing New akku 6V/2.8Ah NC New Akku charger off-shore II - Charge time 2hrs After Service i have use the Strobe only one time in a pool!! Open bidding! Then I have to a: Extra 4500 Kelvin reflector: 150 euros Strobearm Off Shore, THE UTIMATIVE ARM!!! The arm is nearly new: 170 euros info att: Off shore Off shore PDF file All things in perfect conditions.
  15. i know , maybe is to early , but i hope some may have a opinion. The question is will a Nikon D300 fit in a Nexus d200 housing? I am not asking that every button work but more if the lensmount is in the same axis to the dome.
  16. i use this mask always. I am a freediver and in my style its work perfect and yes you come exrem close to the viewfinder but you angle off view is very limited as scuba diver. for freediving UW photografer as me its just great. I have 3 off those
  17. My wish is to sell the Anthis d200 & the Athena zoom together with all extensions zoom gears and tools for: 1800 euros + shippment (ca 30-50 euros)
  18. This is a NEXUS DOME!!!!! Build from Athena Its a Optical Dome fisheye 170 Port Model: OPD-F170/M100 - Serial No: 505432 I have use it with: Nikon 10,5 & 16mm Tokina 12-24 with a 30cm extension Other use it with Sigma 15mm Nikon 17-35 Nikon 12-24 Nikon 17-55 and may others as 10-20, 10-17
  19. Yes this is the great Athena dome for Nexus housings: In the box i have follow info: Optical Dome fisheye 170 Port Model: OPD-F170/M100 Serial No: 505432
  20. I am switching system and selling off a: 1. ) A Nexus housing for the Nikon D200 multi finder model with pick up lens. x0.7 reducer lens for wide angle, x1.2 magnifire lens, for macro Housing has never been flooded, great condition with exra orings etc etc.. package is complet Ex Ring: 20mm, 30mm, 40mm NEXUS 735 zoom gear (i have used with a tokina 12-24) Nexus zoom Gear-NAFZ18/70G for 17-55 (flexible to use with other lenses) More info on http://www.marinecamera.com/nexus_d200.html 2.) A Athena OPD-170 Dome with hood and cover. Glass is perfect no scraches or anything else. Athena Dome work with any WA lens. I have use it with Nikon 10,5, Nikon 16, Tokina 12-24 but I know its work with 10-20, 12-24, 10-17, 17-55, and other lenses with extensions. Athena have this dome for Nexus, but now just for Sea & Sea (optical dome). 3.) Fantasea FSB-800, Housing for Nikon SB 800 Digital Flash. Full Controls for all Flash Functions including iTTL 4.) Sea&Sea Dual strobe cable Sea&Sea strobe cable N new newer used!!!!! 5.) ULCS Arms & Parts AC-USLm AD-HS 4xACCSF clamps 3x ACCS clamps 2 x DB-arms L 2x DB-08 arms AC-TRI And the ball adapter for AC-TRI 2 xBA-AQW AD-SS YS adapter I'm located in Europe – Sweden Serious bidders only!!!! Add actual shipping costs. Paypal or to my Bankaccount & I check to clear before i deliver.
×
×
  • Create New...