Jump to content

gonenomad

Member
  • Content Count

    38
  • Joined

  • Last visited

Community Reputation

2 Neutral

About gonenomad

  • Rank
    Triggerfish

Profile Information

  • Gender
    Male

Additional Info

  • Show Country Flag:
    --
  • Camera Model & Brand
    Olympus EM5, EM1, RX100
  • Camera Housing
    Nauticam
  • Strobe/Lighting Model & Brand
    Sea&Sea DS1

Recent Profile Visitors

3784 profile views
  1. I have a 4.33 dome and olympus 8mm lens for sale.
  2. I don't have a mk2 to see if it works. E box and housing are marked for both. I know it works for the Mk1.
  3. 60mm and 8mm are sold. 45mm and mini dome port are sold. Still available are the GX1 and EM5 housings/bodies. I will make a good deal on these! 14-42 R with gear and port is also still available.
  4. Located in California USA. The port, gear, and extension ring worked great with my EM5 and the GX1
  5. Need to pay off the credit card after investing in a new full frame system. Olympus OMD EM5 with Nauticam Housing - $500 18335 shutter actuations Panasonic GX1 with Nauticam Housing (2 bodies) - $400 Includes a vacuum port from ikelite on the housing Includes batteries and chargers Olympus 12-42 R II lens with focus gear and Nauticam 56 port - $300 Works fantastic with macro and wide wet lenses Olympus 8mm Pro Fisheye - $700 Nauticam 4.33 Dome - $375 Use the 20mm extension for the Olympus 8mm Nauticam 20mm extension - $125 Olympus 12-40 Pro lens with gear - $475 Works great behind a 170mm zen dome! Olympus 60mm Macro gear $30 Use the 45 port along with the 20mm extension for the Olympus 60mm 60mm Macro lens is already sold Olympus 30mm Macro with gear $150 Use the 45 port Nauticam 45 Port - $200 This port and the Olympus or Panasonic 30mm are what you want for the Nauticam MWL Inon 67mm Macro Wet Diopter - $50 Sea&Sea 110 Strobes (2) $150 each Would prefer to bundle items together as I don’t want to make a whole bunch of trips to the post office! Lots of pictures here: https://drive.google.com/drive/folders/1CVAlFWQNRW95tl8X55njiUFwiiVenBp0?usp=sharing
  6. Thank you to everyone for the replies. I reset the camera today and the odd behavior has gone away. Somehow one of the settings I changed caused this, but I am still unsure which setting was the culprit. I was trying to match the settings from my old em5 to the new camera. Also, thank you Chris for mentioning that you set a button to a specific focus distance, I definitely want to do that. The em1 has a few extra programable buttons than my em5.
  7. Been using my Olympus 60mm lens and original EM5Mk1 for a few years now. It works fantastic on land and underwater. When I dive with it I set the limiter to the 0.9-.4m setting which makes focusing performance better. This works great with the now older EM5. However, with my new EM1Mk2 the focus limiter doesn't work. On autofocus the lens hunts throughout the entire range. It doesn't matter where the limiter is set, it cycles through the entire range on the EM1. The limiter works properly on the EM5. The lens and both camera bodies are all updated with the latest firmware. A lot of times with the EM5 I would use manual focus and just rock the camera back and forth to find the focus. However, sometimes I would use autofocus and place the focus point right where I wanted it. This usually worked very well and focus was quick with the EM5. However, with the EM1 the focus hunts back and forth throughout it's entire range and sometimes takes a while to find focus. I can replicate the same behavior on land as well. With the EM5 the focus limiter works as intended; however, with the EM1 it is as if the limiter is ignored. Has anyone else dealt with this? Have I missed a setting on the EM1Mk2 that disables the limiter? I looked through the manual but cannot find a mention of the limiter.
  8. I was thinking of selling the one that I have. Need to buy a new dome port! What are you looking to spend?
  9. The housing is still available. I don't have a mk2 camera to test fit, so I can't say 100%. However, the box and housing seem to indicate that both camera versions fit. I would be happy to ship to Denmark.
×
×
  • Create New...