Jump to content

drywh

Member
  • Content Count

    38
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by drywh

  1. Just returned from Anilo, took some photos and tested my strobes。 And some internal construction photos
  2. Light passes through the interface between water and glass and is incident vertically. So that's the same.
  3. Prism is the best maybe , Since optical paths are reversible, the opposite arrangement is also true.
  4. Convex lenses converge light. Convex lenses must be placed in air, not in water.
  5. It was found that each camera has an LED focus light. The power of this focus light is small, but the camera's focusing system is particularly sensitive to this orange-yellow light. Because the camera case blocked the camera's focus light, I specifically looked for On a few of these focusing LEDs, requesting the factory to customize this light. On land test, the camera will focus quickly. When you take a pic with flash, there is not any visible orange-yellow spots in the photos. This orange-yellow Light will not scare the creatures in the water maybe.
  6. Hi ! I don't think that the potentiometer is not broken, it just rusts the surface. I didn't continue to fix the flash because I saw that an electrolytic capacitor on the board had been corroded by seawater to leave only a little bit, so it is inferred that there are many electronic parts that are also affected by seawater, if I need to fix it. Spend a lot of time and look for problems one by one. If you know exactly which part is broken, then this fix is ​​easy and worthwhile. If the potentiometer is broken and you can't find a potentiometer with the same shape, I can find the same carbon film inside from other potentiometer , just replace the carbon film. I don't think that the potentiometer is not broken, it just rusts the surface. I didn't continue to fix the flash because I saw that an electrolytic capacitor on the board had been corroded by seawater to leave only a little bit, so it is inferred that there are many electronic parts that are also affected by seawater, if I need to fix it. Spend a lot of time and look for problems one by one. If you know exactly which part is broken, then this fix is ​​easy and worthwhile. If the potentiometer is broken and you can't find a potentiometer with the same shape, you can find the same carbon film inside, just replace the carbon film.
  7. This is a broken underwater strobe. I took it apart and found that there were only a few droplets in the housing. The droplets were salty. The potentiometer is seriously rusted, so the position of leakage is the knob to regulate power. Knobs turn potentiometers, but their axes are difficult to align. This will push the O-ring to one side, creating tiny gaps and slow leakage. Sea water also causes an electrolytic capacitor to be dissolved.
  8. Enjoy DIY. btw , $72.15, I can do many of these gorpo strobes.
  9. That is a strobe module from old digital cameras, about 10-12 GN
  10. GoPro住宅中的一个闪光灯
  11. The buttons were dug from the GoPro housing, using this tubular bit. Stick it to the acrylic panel.
  12. The housing is bonded with acrylic. Of course, there must be a groove in which silicone rubber rings are placed. I just draw pictures for Taobao and Taobao help me make them. But it was also done three times before it succeeded. Remove the photodiode from the flash and extend its wires. This allows the photodiode to be placed in front of the flash in the camera housing. Take the button off the GoPro housing and put it on my housing.
  13. [附件=46517:微信图片_20190312155909.jpg][附件=46518:微信图片
  14. http://wetpixel.com/articles/patima-housing-for-the-canon-350d
  15. This is caused by poor heat dissipation. this is a land strobe.its Lamp tube surface has chapped and aged.But it never burned,never broken.Because the land flash has a zoom structure, it has a large gap around Lamp tube reflector.But the underwater strobe tube is sealed around.
  16. I didn't like it, and I didn't remember who produced it. but I did a strobe housing myself. low priced camera strobes. ;-)
  17. Video, wide angle, but ISO=3200, F=11. 1/30, 8mm, EM5ii coron
×
×
  • Create New...