Search the Community
Showing results for tags 'collectable'.
Found 2 results
Decided to part with my Rolleimarine IV (#284x) housing that to my knowledge has never been used. Got it awhile ago from an old timer closing his dive shop and kept it as a decorative item in my home. So has remained there in collectable condition along with a rope absent any discoloration and a gasket that is still shiny with no silicon grease. Everything works, glass is clear with no scratches, all knobs/levers actuate easiy and has a lot of the internal parts but does not include the internal focusing/aperture tower. Figure its about time this iconic housing finds a new home..,as neither have the motivation to find these pieces and am also presently landlocked. More pics available on request, feel free to inquire with additional questions.. Price is $800 insured & CONUS shipped to your door, PP fees on me.
This is another of my Hasselblad housings and it is perfect for the Hasselblad collector or for actual use. It is a very unique opportunity in that it includes the standard front half, the port extension for the 50mm lens, both of the rear halves (one for the 500C/M and one for the SWC) AND A CUSTOM MADE MACRO PORT EXTENSION. This gives you the flexibility to use it for the 50mm, 80mm, 38mm (SWC), and a 120mm macro with two 55mm extension tubes. The macro port extension allows you to shoot amost 1:1 macro by using the 120mm lens with two 55mm extension tubes. By adding a close-up Proxar lens you can get more than 1:1 macro. It does not have any exposure or focus control, use your lighting position to adjust exposure. It actually worked quite well the few times that I used it. It does need to have a focusing light though. I haven't used it in a long time, but it worked great then and is still in incredibly good condition. I don't think that it has ever been used with the SWC back. Never had any leaks. I had Gates change out one of the flash bulkheads to use a Nikonos five pin instead. I also added a leak detector. Includes: - Front section for 500C/M, 500C, and SWC - Rear section for 500C/M, 500C - Film advance adapter for 500C/M, 500C - Lens support ring for 80mm lens - Extension set for 50mm lens - Rear section for SWC - Film advance adapter for SWC - Shutter release adapter for SWC - Original neck strap - Frame viewfinder for the SWC - Custom made port extension for 120mm with two 55mm extension tubes - One set of gears - Wrench to remove the port - Extra o-rings and screws - Original flash bulkhead that was replaced with Nikonos 5-pin - Leak detector Contact me immediately if you are seriously interested in it. I have one offer on it but I have not accepted it yet as it is a bit low.