Search the Community
Showing results for tags 'reflections'.
Found 1 result
I have the Nauticam NA-800 housing with a Nauticam 8.5" acrylic dome and I've been suffering some concerning internal reflections from the rig. I've read on here that most of the reflections that people are getting are a result of the internal flash "showing through" to the dome and reflecting. I'm using an Ikelite hotshot connection so that's an impossibility for my particular case. I didn't notice any other suggestions on the board which might be causing it other than strobe placement. I have tried moving the strobes both fore and aft of the dome and pointing them away. I still seem to get some portion of reflection. I was curious if there are any other factors that may be leading to this issue that I haven't thought of? Obviously everything in the dome is black in color so there isn't any white paint that could be causing them. I've attached a sample to illustrate the type of reflection I'm seeing. I also notice this type of reflection when aiming the camera into the sun. Obviously it's something to do with light reflecting from an outside source. I've only used a Nikon 16-35mm f/4 lens on the camera with the dome so that could be a partial cause/effect of the reflections. I have a UV filter on the front as well. In the meantime, one quick-fix I could do is shoot in DX mode which would effectively crop most of the reflection out...but of course I did not buy the D800E to shoot it in crop mode. :-) Thanks for your help! -Andy