Search the Community
Showing results for tags '5dmkiv'.
Found 6 results
FS:Sea&Sea MDX-5DMKIV housing
msdeedee posted a topic in ClassifiedsFor Sale new never been wet Sea&Sea MDX5DMKIV housing for Canon 5DMKIV This housing was purchased for a trip that was cancelled. It retails at $3899.95 I'm selling it for $3000 that's a savings of $900, buyers pays shipping and PayPal fees USA shipping only all sales final my email is email@example.com I have some assorted ext rings ports and gears 180 and 45 finders too..
For Sale Aquatica A5DSR housing with 8" Acrylic Dome
Knightpics posted a topic in ClassifiedsAquatica A5DSR housing which fits the canon 5dmk3, 5dmk4 & 5ds (I purchased the 5dmk4 conversion kit) with 8” acrylic dome. Port & zoom gear for the Canon L 16-35mm IS USM f4 & port for the Canon L 8-15mm f4 fisheye Obviously comes with 2x neoprene dome covers, original boxes, spare O rings, instructions & paperwork etc £3300 Item location Windsor UK I am also selling the Camera body and lenses All enquiries to firstname.lastname@example.org link to my underwater images http://knightpics.co.uk/Gallery/Albums/Underwater/
Good afternoon. I am seeking some assistance. I just received in my YS-D3's (2 of them) and have them with a Nauticam NA-5DMKIV housing and has the UW Technics flash converter. The strobes will be connected through fiber optic cables. Here is my issue. I cannot get the strobes to fire. The camera is set to trigger a flash when a photo is taken. I can see the red led's of the flash converter send out the pulses. I can see the pulses output at the end of the fiberoptic cable. The led's are pulsing in red. I can trick my strobes into triggering with a flashlight but cannot get them to trigger when they are through the fiber optic. I have tried all three settings on the strobes with no luck. I am hoping it is something simple I am doing wrong as I would like to use the setup this weekend on a dive trip to Catalina. Thank you in advance.
FS Aquatica A5Dmkiii fitted for mkiv
esk5856 posted a topic in ClassifiedsAquatica A5DmkIII underwater camera housing Fits Canon 5DmkIII, 5Ds, 5Dsr, & 5DmkIV body Aquatica 9.25 Glass Megadome Aquatica extension port, zoom gear ring, & focus gear ring for Canon 16-35mm f2.8 lens Pelican 1510 case Foam Filled Plus more $4000 obo
SEACAM Silver for sale
StephenFrink posted a topic in ClassifiedsLooks like new! $3500 SEACAM housing for Canon 5dMK IV camera. S6 bulkheads. (no viewfinder or parts, only underwater housing) SEACAM Seaflash 60D (Canon version). New, never used . $1450 SEACAM zoom gear for Canon EF 16-35 f/2.8 III USM lens. $150 SEACAM pvl 57.5 port Extension (recommended for use with EF 16-35 f/2.8 II or II USM Lens). $175 SEACAM 150mm arm extension (have 4) $75 each SEACAM arm clamps. (have two). $40 each email: email@example.com or call: 305-451-3737
Ikelite Canon 5D complete set-up
Ronfoto posted a topic in ClassifiedsI'm a traveling glamour photographer shooting models on beaches. We were going to a remote dive resort in Fiji so I bought this complete set-up last month for their famous tiger shark dives. Didn't get enough free time to do more than 4 total dives with this rig (2 tank shark dive @60', 1hr pool session filming the models doing Discover Scuba class, 1 hr shore dive filming models doing first ocean dive in Discover class). Overall I don't see myself dragging this case around to many other events, I just have too much above water gear to begin with and for lighting I really do enough video it makes sense for me to have video lights. This kit is as PERFECT as you can get, here's your chance to get a complete rig for half of what you'd normally spend! 100% functional and perfect cosmetic condition. Housing works with the Canon 5D mkIII, 5DS, 5DR and the latest 5D mkIV models (must install the included rubber washer kit). Some of the pieces below have not been used at all (like the flat port assembly I bought to do macro stuff with my 100mm macro lens, only was too busy all week working on above water model shoots to do the nudibranch dives!). Here's what you get: Ikelite 6871.03 Housing for Canon 5D Mark III (5D mkiv with included kit below) Ikelite 5510.45 8" Dome Ikelite 5510.35 Flat Port Assembly Ikelite 5509.27 Standard Zoom Clamp/Sleeve Ikelite 5509.28 Special Zoom Clamp/Sleeve Ikelite 4070.01 SA-100 Arm/Single Cord Kit Ikelite 1061.1 DS161 Strobe (x2) Ikelite 4067 Li-Ion battery (x2) Ikelite 4067.1 Li-Ion battery charger Ikelite 4080.02 Double Ball Arm Ikelite 4080.05 Compact Ball Arm Ikelite 4080.06 Ultralight Double Ball Arm Ikelite 5510.28 Port Ikelite 5510.22 Mod Port Ikelite 5510.11 Mod Port Ikelite 4103.51 Single TTL Cord (x2) Ikelite 4103.52 Dual TTL Cord Ikelite 9295.02 update kit mkiv (can be reversed and used for mkiii) Ikelite 945.01 Strap Wrench for port Ikelite 200.5 Flat port Neoprene Cover Owners manuals, warranty paperwork, lube, gaskets, tools and spare pieces all included, even the original boxes and padding each came in! As a bonus, I also have a 3rd party dome housing for a GoPro Hero5. Good to about 15' deep, it's an acrylic dome with a housing for the Hero5, floating handle and removable trigger system that allows you to capture amazing 1/2 below water shots. Perfect for snorkeling or pool work (we used it to film new divers going through their Discover Scuba dive). Also a Pelican 1615 Wheeled AIR case with foam cut for all of the above (total weight with everything above in the case is only 38 lbs!) with a little bit of room to spare for extras. Total cost for everything above (obviously, the camera body and lenses are not included!) was around $9,000.00 new. Asking $4,000.00 obo. Might be willing to separate a few of the generic pieces and case if you're just looking for the housing and already have your own lights. I'm in Philadelphia, PA USA, willing to ship worldwide at buyers expense, or meet anywhere in the greater Try-state area at no charge. PM your email if you'd like higher res or additional pics.