Search the Community
Showing results for tags 'Leaking'.
Found 2 results
Hello Recently my Fantasea FG16 housing started to leak. As for now it seems that the camera is fine (but it will probably corrode and die at some point). I cleaned and rinsed the housing, checked the two o-rings and took the housing alone on a check dive (with some weight and paper inside it). It was leaking again but I am not able to tell where or how. What would be a good way to find out or do you have any suggestions on how to proceed with this? How to find the leak? Thank you.
Hi everybody, I recently purchased a used but very nice AD7000 Aquatica housing. I'm the second owner. The housing is in almost brand new condition. I've perfomed the immersion test w/o the camera inside, and after an hour inside the water and pressing the buttons regularly, I was pretty confident and I decided to go ahead with the camera inside. It didn't even took 5 seconds and the alarm system started to ring. Water is going badly inside the housing. I took the water off the housing and repeated the test w/o the camera. No leak. I verified everything again ang again, applied lube on my o-rings and did another trial with the camera. Same thing, water goes inside. I'm completely puzzled. What I'm doing wrong ? Does anyone had the same problem ? As I'm writting this, the housing is inside the water ( no camera ) and still dry inside. No leak. Weird. Thanks in advance for your help. Frederic