Search the Community
Showing results for tags 'MDX'.
Found 6 results
-
MDX-7D housing for canon 7D (mark I) optical viewfinder: Optical Viewfinder 0.5x equipped with vacuum leak sentinel (version with electronics inside the housing) + for tokina 10-17: NX Compact Dome Port = 56601 (small dome, no scratches) SX Extension Ring = 50261 Canon zoom ring EF16-35mm F2.8L USM (for Tokina AT-X 107 DX Fisheye 10-17mm F3.5-4.5) + for Canon EF-S Macro 60mm F2.8: NX Compact Macro Port Base = 56201 Compact Macro Port S Port = 56211 + SAGADIVE Macro Canon EF 100 mm F2.8 port in Delrin + SAGA lens holder (gives with a Canon EF Macro 100 mm focus ring printed in 3d) + 1 complete set of orings + circlips for all the buttons on the housings + several seals for ports and domes price = 900 euros optional for the buyer of the housing : large dome (no scratches): 300 euros 45 ° VF45 1.2x viewfinder: 400 euros canon 7D mk I case (18 M pixels): 250 euros tokina 10-17: 200 euros (no separate sale of options for the moment)
-
Sea and Sea nx dome port with front and rear port covers. Excellent condition. A couple of almost imperceptable smudge marks on the dome. $250 buyer pays shipping.
-
I am selling my Sea&Sea MDX D700 housing. It is #55 of 100. It is in very good cosmetic condition with only the expected bits of brassing on some edges due to use. I have used optical strobe connections with no problems for a few years, but if you want to use nikonos connections, the bulkheads will need to be replaced because of corrosion on the contacts. (Due to unseen drops of sea water, I assume) I will try to upload some photos. I paid $3700 originally in 2008. I am asking for $1900. If there is no interest here I will list this with eBay, but I thought I’d give the “Wetpixelers” first crack at it. You may email me with questions at rbenton@sacbee.com
-
I just bought a Sea&Sea MDX-D810 housing and find that the image through the stock viewfinder is very small. I had a Sea&Sea MDX-D700 before and the view seemed fine. Are there adjustments I can make, or replacement viewfinders that will make the image larger? Thank for any advise on this. Randall
-
I am selling here my Sea &Sea MDX Pro D3 which is usable for a Nikon D3 as well as for a Nikon D3x. The complete housing was overhauled/maintananced/pressure tested by mike-dive (www.mike-dive.de), who is well known for modifications, repairings and special ideas. He put in a iTTL-Converter so that two strobes can be used together. A manual switch allows you do disable the TTL-Converter by hand outside the housing with a knob. Perfect who likes TTL for Macro. Please see pictures below. For this nice feature we decided to change the S/C/M knob into the TTL-converter knob at the same place. The housing is fitted with a standard viewer, the condition is good for sure it hast the normal markings from usage. Addtional I have: 1 each NX Zoom Port, P/N 51101 no scratches on the front glas 1 each Adpater Ring 40, P/N 56111 1 each SX-Ring, P/N 50261 1 each NC Compact Macro Port, P/BN 56201 1 each Compact Macro Port S (35), P/N 56211 no scratches on the front glas but a small dent in the plastic 1 each NX Fisheye Dome Port, P/N 56401 modified with removabel weights Following gears: 1 each Zoom Ring for Sigma 17-35 1 each USM Zoom Gear for Canon EF16-35 f2.8 1 each NX Sigma Mini Zoom Macro 28-80 f3.5-5.6 HF Focus Gear 1 each NX Sigma Mini Zoom Macro 28-80 f3.5-5.6 HF Zoom Gear 1 each AF Nikkor ED 17-354 f 2.98D Zoom Gear 1 each Zoom Gear for Nikon 105 VR usable allone and with Kenko 1.4 Converter (made by xit404.com) 1 each Sea & Sea Single Strobe Cable 5-pin 1 each Sea & Sea Dual Sync Cable 5-pin 2 Flash-Arms (Combination of Sea&Sea Arm VI with Mike-Dive Arms) A lot of unused O-Rings, spares, grease etc. are included. I am interested to sell everything in one lot, my price is EUR 1100,- for the complete listed equipment. The material is located in Germany and can be packed well for shipment.
-
I have a full Sea&Sea set for a Nikon F100 but no longer have the camera; I now run a D700. I am looking for an MDX-700 PRO, since I have all the ports, but would also consider a Nauticam since they make an adapter for S&S ports. Anyone have a line on one? Cheers, Paul
