Search the Community
Showing results for tags 'remote trigger'.
Found 1 result
-
Hi I have a brand new Anglerfish trigger (4 dives total). After some training I learned how to reliably turn it on (took a while to get their system). Today I returned to diving and the trigger wont fire. I know that I turned it on (funny blinking blue lights) but the optic bulkhead wont flash. I checked with two cables and then finally resorted to look at the led to see if it flashes. Aside from turning half blind with all the test strobes I could not get it to work. The product manual writes: "If the optical trigger does not trigger the remote strobe, remove the fiber optic cable from the unit and inspect the small high power LED inside the optical bulkhead. Operate the camera strobe serval times and see if the LED blinks while the camera strobe fires. If the LED does flash bright, the fault could be in the optical cable or the strobe settings. Make sure you follow the strobe manufacture’s settings for operating the remote strobe via optical cable. [goes on discussing cable troubleshooting] " The manual does not say what to do if the LED does NOT flash bright.... which is my situation. And again, the battery is ok and the trigger turn on/off sequences work as they should. Any ideas for further checks? (I don't have an electrical cable to test with) Thanks!
