Jump to content
keiban

Gates Replacement Wide-Angle Domes

Recommended Posts

Hello,

Im building an small dome port for a minihousing, and saw at B&H the Gates Replacement Wide-Angle Dome for GP25A Port/GP35A Ports, anyone can tell me the diameters of them?

Thanks for the help!

Gustavo

Share this post


Link to post
Share on other sites

O.K Pamela at Gates gives me the answer:

 

"Outer diameter of the acrylic piece (dome) is 3.550 of both the GP35A and

the GP25A.

The number corresponds to the back side of the port that attaches to the

housing. The 25 is for the 2.5 inch port opening and the 35 is for the 3.5

inch port opening. They are specific to a certain series of housings. The

aluminum port shells are shaped a bit differently overall but

the front dome is the same size. We try to use the same parts across many

products to simplify production."

 

Thanks Pamela!

 

Hello,

Im building an small dome port for a minihousing, and saw at B&H the Gates Replacement Wide-Angle Dome for GP25A Port/GP35A Ports, anyone can tell me the diameters of them?

Thanks for the help!

Gustavo

Share this post


Link to post
Share on other sites

Sponsors

Advertisements



×
×
  • Create New...