Sea & Sea sync cord

[wwlam 0]

I got Sea & Sea DX100 for D100 comes with YS-350 Pro and YS-120 dual. only the YS-350 Pro work with TTL, the YS-120 work as slave. I would like to know if I buy a 5 pin dual sync cord, can they both work with TTL? Or need a TTL converter? I alos have a YS-110a. don't know how to make them all work with TTL

 

Thanks!

[wwlam 0]

Need help Please

[ornate_wrasse 0]

Hi,

 

I don't know the answer but the folks at Reef Photo should be able to help.

 

Reef Photo and Video

 

Hope that helps,

 

Ellen

[kkfok 24]

D100 use D-TTL and so I think you need a converter.

As only a fews pins of the bulkhead have connections to hotshoe of the camera in old sea&sea housing, they need modifications on the bulkhead before they can be used with TTL converter.

 

Also I can't find D100 in the compatibility list of Sea&Sea TTL Converter, I think you may need a HW TTL converter.

http://www.seaandsea.jp/products/accessory/ys.html

[wwlam 0]

Thanks again

[ramon 0]

I hope it is not too late.

For the DX-D100 you need to send it to S&S for a modification.

I understand that not all DX-D100 housings are suited for this modification, it depends on the serial number.

If you connect a TTL converter to a not suited converter connector will damage the converter and possibly the housing.

Regards