bversteegh 0 Posted August 5, 2010 My sea & sea fisheye dome port has a pinhole leak in the potting mounting the acrylic dome to the port body. Anybody have any suggestions on the proper adhesive to use for the repair? Share this post Link to post Share on other sites
toby77 0 Posted August 6, 2010 (edited) I had the exact same problem. Tried some different adhesives like Aquasure and two component adhesive but without any luck. I was told it was due to inside pressure due to dome attached to housing during travel, allthough i have always removed my dome from the housing when traveling... I ended up in buying a new dome port Edited August 6, 2010 by toby77 Share this post Link to post Share on other sites
Paul Kay 31 Posted August 6, 2010 I remember talking to Kevin at Aquaphot (UK) about these adhesives. I'm pretty sure that it can be repaired but I'd find a professional who understands just what is involved to do the repair. The adhesive was an odd one - I'm think he said that ports are economic to repair though even if they need re-seating altogether. Share this post Link to post Share on other sites
alibab 0 Posted August 12, 2010 (edited) I had the exact same problem too. My dome port leak only with little presure. I 've repaired it with a marine silicone, i've no remove the dome from the port. just remove the Adorn sun and put a marine silicone. I've do it 2 years ago, but no pb! Edited August 12, 2010 by alibab Share this post Link to post Share on other sites
