cmm1970 1 Posted November 9, 2003 Are any of you using a WA enabled card like the 1Gb Lexar 40x card with a Fuji S2. Does it require a firmware update to make it happen. Second question, If you are using a microdrive IBM or Hitachi(same card I think), are you happy with write speed with your S2? Thanks for posting replies! Mike Share this post Link to post Share on other sites
james 0 Posted November 9, 2003 The S2 does not have "write acceleration" built in. Only a few of the newer and "high end" cameras do. To see which CF cards perform best in the S2, see Rob Galbraith's media comparison page at www.robgalbraith.com I use a Viking CF card and a Microdrive. HTH James Wiseman Share this post Link to post Share on other sites
lindai 1 Posted November 10, 2003 I am using the Lexar 1 GB 32X WA card with a Fuji S2 with absolutely no problems, and no updates. As James said the S2 doesn't have the WA capability, but the card still works fine. Regards, Linda Share this post Link to post Share on other sites
Chris Bangs 0 Posted November 10, 2003 The Transend 1 GB 32X card works fine as well. Chris Share this post Link to post Share on other sites
marriard 0 Posted November 10, 2003 I am using a 2GB Lexar CF card with the S2 with no issues. M Share this post Link to post Share on other sites
bdickson 0 Posted November 10, 2003 Has anyone used the Magicstor 2.2Gb Microdrive CF card in a Fuji S2? Drives over 2Gb need to be formatted FAT32, and it appears that the S2 only recognizes FAT16. Bruce. Share this post Link to post Share on other sites
