scubamarli 5 Posted December 28, 2003 Does anyone know if a second bulkhead connector can be added to a single bulkhead Aquatica housing for the Nikon F100? Marli Share this post Link to post Share on other sites
Chris Bangs 0 Posted December 28, 2003 Marli Your housing should have a second hole (that is plugged) located next to your existing flash bulkhead. Aquatica does offer a "dual" bulkhead assembly. If I am not mistaken, the single connection you have now must be replaced as well. The kit includes two bulkheads which are wired to a single hot shoe connector in the housing.You can install it yourself as well. Oh yea, it is not cheap! ( $150 ~ $200), then again, what underwater camera equipment is? Chris Share this post Link to post Share on other sites
Cybergoldfish 0 Posted December 28, 2003 Check B&H may be cheaper- I paid $150.00 Share this post Link to post Share on other sites
scubamarli 5 Posted December 29, 2003 Thanks, guys! Marli Share this post Link to post Share on other sites
Paul Kay 41 Posted January 1, 2004 An alternative may be to look at an Inon slave converter which can be used on various flash units. This effectively provides cableless ttl (or manual) control on a second flash unit. I've used one with an SB105 and tried one with a YS120 with good results. And no need for a second socket or cable (the most likely things to fail!). Share this post Link to post Share on other sites
scubamarli 5 Posted January 1, 2004 Any idea where I can get one in North America? Marli Share this post Link to post Share on other sites
Cybergoldfish 0 Posted January 1, 2004 Drop Ryan a message he may know. Share this post Link to post Share on other sites
